PVC-U圓柱形過濾網：

適用于在線過濾器——305型；

規格：DN15-DN80；

過濾網孔徑：0.5mm,0.8mm

產地及品牌:瑞士+GF+

 

PVC-U在線過濾器:

形式:1.保護閥門,泵等不被污染;2.方便拆卸清洗過濾網;3.尺寸范圍:DN15-80

 

PVC-U固定法蘭盤:

帶符合ISO/DIN標準的粘接承插口;

聯接尺寸符合:ISO/DIN2501 PN10

 

O形圈:

硬度:肖氏硬度EPDM約65º；FPM約75º

適用于PVC-U活接頭、法蘭翻邊

 

球形止回閥：

形式：方便拆卸的活接頭；球可密封水柱最少1米；高流速無振動；尺寸范圍：DN10-50（80）；

材質：PVC-U、PP、PVDF、ABS

 

PVC-U角座止回閥：

形式：可水平或垂直安裝；即使壓力最小時也能保持密封；尺寸范圍：DN10-DN80；

 

PVC-U手動隔膜閥：

形式：方便拆裝的活接頭；總長度緊湊；尺寸范圍：DN15-DN50；

選購件：鎖緊型（標準型號不可鎖緊）

 

PVDF三通閥：

Model:

T-port ball;

For easy installation and removal ;

Ball seals PTFE ;

Pneumatic or electric actuator available separately ;

Angle of operation 90 ,without turn limiter;

 

PVC-U板式止回閥：

Model:

Supporting eyelets for simple fitting

Suitable for vertical and horizontal mounting

Installation instruction:

• Wafer check valves without reset spring are not recommended for pulsating flows  (production of noise)
• Installation between ISO/DIN (all dimensions) and ANSI flange adaptors (all except DN32 and DN125)
• Installation with ANSI flange adaptor: for wafer check valves DN40 to DN80 you have to use ANSI flange adaptors with the next bigger dimension (example DN40 wafer check  valve between DN50 ANSI flange adaptor)
• Centering by body diameter (ISO/DIN by D3, ANSI by D)
• Sealing with special flange gasket (except DN32, o-ring)
• A stabilizing zone of at least 5 times nominal diameter (DN) should be provided before and after the wafer check valve (10 times DN is recommended)
• No direct installation on pump flange or following bend allowed
• The using of PVC-U pipe PN16 is only possible up to d63

GF 管件

包裝尺寸:5M/條

規格:DN10-DN100

公稱壓力:PN6,PN10,PN16,PN20

材質:PP-H、PVC-U、PVDF