優化環模主要技術參數和配置，同等功率產量顯著提高。

安全銷系統改成軸向過載保護系統，拆裝方便，安全可靠。

傳動輪改進，更換軸承油封快速方便,延長大軸承使用壽命。

下料斜槽改進，采用特殊結構設計，可直接進入冷卻器，避免交叉污染。

喂料調質系統采用閉氣裝置，減少蒸汽的溢出，避免竄氣；提高調質效率，使物料與蒸汽充分接觸，提高熟化度3%。

采用主軸后軸承定位系統，避免主軸花鍵間隙造成晃動，制粒機主機電流平穩，延長壓模壓輥使用壽命。

抱箍采用凸緣式螺釘聯接結構，聯接可靠，提高抱箍使用壽命。

主傳動采用進口軸承油封！

Optimized technical data for dies and output is increased significantly.

Safety pin is changed to axle overload protection system; easily assemble and disassemble, safe and dependable.

The driving wheel is advanced to make oil seal can be replaced easily and service life of main bearing is extended.

The feeding chute is advanced and pellets can enter cooler directly to avoid cross contamination 

The shut off system for feeder and conditioner is used to reduce overflow of steam; cooking efficiency is increased and makes materials contact with steam fully; the gelatinization can be increased 3%.

The position system by back bearings of main shaft is adopted to prevent vibration caused by spline and ensures current of main motor stable and extends service life of rollers and dies.  

Protuberant screws are used to connect die clamps with advantages of stable operation and longer service life of die clamps.