LLDPE Tube LLDPE TUBE The John Guest PE Range of plastic tubing is produced in Linear Low Density Polyethylene. Our tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non contaminating materials. Common applications are in water purification, water conditioners, ice makers and misting systems. LLDPE is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water. Our tubing is made from FDA approved materials and is NSF International certified. John Guest Polyethylene tubing is designed for use with John Guest Super Speedfit push-in fittings, John Guest Shut-Off Valves and virtually all standard tubing connectors. LLDPE Tubing SIZES AVAILABLE Part No. OD ID Coil Length Min Bend Radii PE-08-BI-0500F-N 1/4"(0.250") 0.170" 500 FT 1.00" PE-08-BI-1000F-N 1/4"(0.250") 0.170" 1000 FT 1.00" PE-10-CI-0500F-N 5/16"(0.312") 0.187" 500 FT 1.13" PE-12-EI-0500F-N 3/8"(0.375") 0.250" 500 FT 1.25" PE-16-GI-0250F-N 1/2"(0.500") 0.375" 250 FT 2.50" PE-04025-0100M-N 4mm 2.5mm 100m 25mm PE-0604-0100M-N 6mm 4mm 100m 25mm PE-0806-0100M-N 8mm 6mm 100m 30mm PE-1007-100M-N 10mm 7mm 100m 32mm PE-1209-100M-N 12mm 9mm 100m 63mm PE-15115-0100M 15mm 11.5mm 100m 100mm N denotes natural colour. To request other colours please refer to table below. Popular items are now generally in stock and are available in minimum quantities of 2 coils. Other items may be subject to longer lead times and are available in minimum of 50 coils. STANDARD COLOURS AVAILABLE SUFFIX COLOUR N Natural B Blue E Black R Red Other special colours available on request :- Orange (O) Green (G) Violet (V) Yellow (Y) White (W)