和DPM監控儀表配套使用
Service: Air and compatible gases, any type particulate.
Wetted Materials: 304SS and PTFE.
Minimum Detection: 5.0 pA.
Temperature Limits: Ambient: Maximum -40 to 392°F (-40 to 200°C) (Maximum must be calculated for each application).
Process: See Model Chart on Ordering Page.
Pressure Limits: Standard: Full vacuum to 10 psi (0.69 bar); Optional: 100 psi (6.89 bar).
Output Signal: pA.
Electrical Connection: Low noise coaxial.
Process Connection: See Model Chart on Ordering Page.
Enclosure: Standard: Painted cast aluminum, Weatherproof, NEMA 4X; Optional: Intrinsically Safe, CSA.
Weight: Varies depending on length of probe and type of mount.
Agency Approvals: CE, CSA.
| Example | PMS | A1 | 1 | T1 | P1 | L1.5 | PMS-A1P1T1P1-L1.5 Particulate Sensor, weatherproof, NEMA 4X, 1/2" NPT connection, 250°F max. temp., 10 psi max. pressure, 1.5" probe. |
| Series Designator | PMS | PMS Particulate Sensor | |||||
| Enclosure Rating | A1 AHZ1 |
Weatherproof, NEMA 4X Intrinsically Safe, CSA & CE Approvals, Class I, II and III, Divisions I & II, All Groups, NEMA 4X (requires sanitary connection or flange mount). |
|||||
| Process Connection | 1 2 3 4 |
1/2" NPT 1.5" Sanitary Connection 2" 150# ANSI Flange 2" 150# ANSI Flange with Process Mating Flange and Installation Kit. |
|||||
| Maximum Process Temperature |
T1 T2 T3 T4 |
250°F (121°C) 450°F (232°C) 800°F (426°C) -requires flange mount 1200°F (649°C) - requires flange mount |
|||||
| Maximum Process Pressure |
P1 P2 |
10 psi 100 psi - requires flange mount |
|||||
| Insertion Length (recommended at least 1/2 duct diameter) |
L1.5 L03 L05 L10 L15 L20 L30 L36 L48 L60 L72 |
1.5" Probe |
掃一掃“二維碼”快速鏈接企業微店
推薦使用 微信 或 UC 掃一掃 等掃碼工具
微店融入移動互聯網帶來更多的商業機會。
