ALARATE (ALATHER) BN Series Inks
(特種橡膠專用油墨)
Ⅰ、Description (產品描述)
ALARATE (ALATHER) BN series inks, which prepared with the excellent hydrophobic resin, high quality pigments and fillers, and so on, are of excellent adhesion and good covering powder. The film is of excellent flexibility and is anti-tensile, washable, foldable, etc.
ALARATE (ALATHER) BN系列油墨由疏水性優秀的樹脂、優質的顏填料配制而成。該產品附著力極佳,遮蓋力高;涂膜柔軟性非常好,抗拉伸能力強,耐水洗,可折疊。
Ⅱ、Recommended Application (推薦應用)
◆ Recommended substrate: PA(Polyamide Fiber), PU, PET, PVC, Touch Rubber, etc.
◆ Recommended for: Leather, waterproof nylon, canvas,
◇ 適用基材:PA(Polyamide Fiber)、PU、PET、PVC、手感橡膠等
◇ 推薦用途:皮革、防水尼龍、帆布、牛津布、織帶、嘜頭、不干膠、卡片、噴涂手感橡膠的塑料制品等
Ⅲ、Proposed Operation (操作建議)
Prepare: To clean the surface with ALATIVE SC7 treater and make sure non-dust, non-impurity. To dilute the ink with 3-20% ALATIVE SR6 thinner and then is ready(In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant). In order to improve the adhesion and hardness of the film effectively, please add 10-15% (to total) ALATIVE SA5 activator.
Mesh count: 70T to 180T
Drying: Air dry in 15 to 30 minutes , or forced dry at 60 OC in about 10 minutes (without activator).
Air dry in 12-15 hours, or forced dry at 80 OC in about 30 minutes (activator added).
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
印前:用ALATIVE SC7清洗印件表面,確定無塵、雜質;用3-20%的ALATIVE SR6將產品稀釋至需要稠度,即可印刷(調節油墨干燥速度,可以配合適量的ALATIVE RR6或ALATIVE SF3)。添加10-15%的ALATIVE SA5活劑化劑,可以有效提高涂膜附著力和硬度。
網紗:70T至180T
干燥:自然風干15至30分鐘,或60OC烘干,約10分鐘(不添加活化劑)。
自然風干12-15小時;或者70OC烘干,約45分鐘(添加活化劑)。
清洗:用ALATIVE SC6清除污點和不良印刷;用ALATIVE CC6清洗網板。
Ⅳ、Color & Packaging (顏色&包裝)
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
顏色:二十多種顏色供選擇,并專業調色
包裝:1千克/罐;5千克/桶;20千克/桶