相關(guān)型號
1. CPC16200CPCI-6020
2. CPCI-7145CPCI-7200
3. AMC-S302 - 80GB SATA Extended Duty
4. AMC-S320 - 80GB SATA Extreme Duty
5. AMC-S402 - 146/300GB SAS Enterprise Duty
6. AMC-S502 - 32GB SATA Solid State
7. AMC-S602 - 160GB (Dual 80GB) SATA Extreme Duty
8. AMC-9210: AdvancedMC Module AMC.0 R2.0 mid-size and full-size AdvancedMC module
Cavium Networks high performance OCTEON Plus CN58xx family of packet processors
4x GbE (AMC.2) plus x4 PCI Express (AMC.1) to carrier
4x GbE small form factor plug-in (SFP) interfaces on front panel
9. AMC-S301: Advanced Mezzanine Card (AMC) drive carrier，AMC-S301 80GB Disk Module
80GB SATA drive in a full-size AMC module
Supports both port 2 and port 3 via switch or IPMI setting
Extended duty drive for 24/7 50% duty cycle operation
More
10.
PrAMC-6201: Full Size Advanced Mezzanine Card， PowerPC MPC7448 processor running up to 1.4 GHz core frequency and 1MB L2 cache
MV64460 Marvell Discovery III system controller
167 MHz MPX bus
Memory configurations possible up to 2GB with ECC support
More
11. PrAMC-6210 Full or Mid, Single AdvancedMC Module Designed to the PICMG® AdvancedMC specification
Full and mid AdvancedMC form factor
Freescale MPC8641D PowerPC microprocessor
Dual core processor capable of symmetric or asymmetric multiprocessing
More
12.
PrAMC-7210/7211 AMC Processor Module ，Intel® Core™ 2 Duo processor core with 4MB L2 cache, running at 1.5 GHz
667 MHz frontside bus, connecting processor and Intel 3100 chipset
Up to 4GB DDR-400 memory with ECC support
MontaVista CGL or Wind River PNE Linux operating environment combined with Basic Blade Services compliant to the SA Forum hardware platform interface (HPI) layer
More
13.
KSI8560 PowerQUICC III based AdvancedMC Module，AMC (PICMG® Advanced Mezzanine Card Base Specification) with up to 8 software selectable E1/T1/J1 interfaces
Freescale Semiconductor MPC8560 PowerQUICC III integrated communications processor
Up to 256 MB Double Data Rate (DDR) SDRAM with Error-correcting Code (ECC)
4 MB boot flash with redundancy, and up to 1 GB user flash
More
14. ATCA-7105, ATCA-7107 Processor Blade。High performance processor blade with four PMC sites
1.8 GHz Intel® Pentium® M processor
Intel E7501 server-class chipset supporting 4.3GB/s memory bandwidth
2GB and 4GB versions available
More
15.
ATCA-7140 Dual-Core Processor Blade。High performance processor blade with SMP support
Two Dual-Core Intel® Xeon® (2.13 GHz) LV processors
Multiple software packages including operating system
PICMG 3.0 Gigabit Ethernet base interface support
More
16.
ATCA-7150 High performance processor blade with SMP support
Two, Dual-Core Intel® Xeon™ (2.13 GHz) LV processors
Multiple software packages including operating system
PICMG 3.0 Gigabit Ethernet base interface support
More
17.
ATCA-7221 Processor Blade High performance processor blade with SMP support
Dual 2.8 GHz Intel Xeon LV processors
PICMG 3.0 Gigabit Ethernet base interface support
PICMG 3.1, Option 1 and 2 fabric interface support
More
18.
ATCA-7301 2.16 GHz Intel® Core™ 2 Duo processors
On-board 24-port Gigabit Ethernet switch
Two mid size AdvancedMC™ sites
AMC.0, AMC.1 and AMC.2 compliant
More
19.
ATCA-7350 High performance processor blade with SMP support
Two, Quad-Core Intel® Xeon® (2.13 GHz) LV processors
Up to 32GB main memory
Multiple software packages including operating system
More
20.
ATCA-9301 Many-Core Processor Blade，Two Cavium OCTEON 5860 processors with sixteen 900 MHz MIPS64 cores each for high bandwidth packet processing applications
Hardware acceleration with thread pinning, security, de-/compression, regexp, packet queuing, and scheduling functions
10-port Gigabit Ethernet rear transition module network interfaces
Designed to deliver telco-grade reliability
More
21.
ATCA-9305 Many-Core Processor Blade。Two Cavium OCTEON 16-core CN5860 processors operating up to 900 MHz
Freescale MPC8548 PowerQuicc III integrated communications processor operating at 1 GHz
Hardware acceleration with thread pinning, security, de-/compression, regexp, packet queuing and scheduling functions
Broadcom BCM56802 10 Gigabit Ethernet (GbE) multilayer switch
More
22.
ATCA-C121 10 Gigabit ATCA AMC Carrier Blade 。Modular design – four full height, single wide AdvancedMC™ (AMC) sites
Enables scalable and distributed computing
Mixed data plane and control application on the same blade
On-board service processor
More
23.
ATCA-S110 Storage Blade。 SCSI based AdvancedTCA storage blade
PICMG 3.0 compliant
Single-slot storage solution
300GB and 600GB capacity versions
More
24.
ATCA-S120 Storage Blade。ATCA storage blade with four (4) mid-size AMC slots
Additional storage via RTM mounted HDDs
Up to 876GB of storage on a single blade
SAS and SATA media support
More
25.
ATCA-S201 Storage Blade。ATCA storage blade with four (4) mid-size AMC slots
Additional storage via RTM mounted hard disk drives (HDDs)
Up to 876GB of storage per blade/RTM combination，Hardware-based RAID 0, 1 and 1EiSCSI target and NAS file sharing
More
26.
KatanaQP Processor Blades Single or Dual PowerPC™ MPC7448 processors running at up to 1.4GHz
2-Way SMP Architecture
ATCA PICMG 3.1 Node (1000Base-T Base interface + Octal High Speed GbE Fabric iterface)
Layer 2/3 Ethernet switch option
More
27.
KatanaPPB Processor Blades Up to six PowerPPC 7448 processors
- Dual Freescale® PowerPC™ 7448 processors running up to 1GHz on the baseboard
- Up to four Freescale PowerPC 7448 processors running up to 1GHz on four modules
ATCA PICMG® 3.1 Option 3
Up to 1GB DDR SDRAM with ECC in SO-DIMM package on the baseboard and up to 512MB DDR SDRAM on each processor module
128MB of flash memory on the baseboard and total of 256MB of flash memory on four modules
More
28.
Katana 2000 Commercial ATCA Bladed Server 3U, 19" dual nn server platform based on ATCA technology for high performance, high reliability computing
Supplied with one or two server blades each with two quad-core Intel® Xeon® 5500 series processor
Front-to-rear cooling to meet ASHRAE and IT best practice requirements
Support for power saving features enhancing energy efficiency
More
29.
Centellis 2000 3U, 19" chassis with two horizontal blade slots
Scalable reliability for central office and data center environments
Front-to-rear cooling
Fault-resilient design; front maintenance and rear cabling
More
30.
Centellis 3406 14-slot, 19" (3406) and 16-slot, 23” (3600) 12.5U form factor
Modular computing via AMC technology
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
More
31.
Centellis 3600 Fully integrated and validated AdvancedTCA system platform
16-slot, 23 AdvancedTCA shelf
Small footprint, 12.5 U form factor
Redundant shelf management, fan trays and power entry modules
More
32.
Centellis 4440 Best-in-class thermal characteristics
Fabric interface bandwidth options for 1/10/40GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.4 thermal compliance
More
33.
Centellis 4410 High performance features at entry-level price points
Fabric interface bandwidth options for 1/10GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.3 thermal compliance
More
34.
Centellis 4620 14-slot, 19” (4420) and 16-slot, 23” (4620) 13U form factor
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
Combined switch/control blades to maximize billable application slots
More
35.
Centellis 31KX High Availability Platform ATCA shelf to deliver 5NINES availability into central office environments
13U/19” chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More
36.
Centellis 4100 High Availability Platform ATCA shelf to deliver 5NINES availability into central office environments
13U/19" chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More
37. Centellis 2000 3U, 19" chassis with two horizontal blade slots
Scalable reliability for central office and data center environments
Front-to-rear cooling
Fault-resilient design; front maintenance and rear cabling
More
38.
Centellis 3406 14-slot, 19" (3406) and 16-slot, 23” (3600) 12.5U form factor
Modular computing via AMC technology
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
More
39.
Centellis 3600 14-slot, 19" (3406) and 16-slot, 23” (3600) 12.5U form factor
Modular computing via AMC technology
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
More
40.
Centellis 4440 Best-in-class thermal characteristics
Fabric interface bandwidth options for 1/10/40GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.4 thermal compliance
More
41.
Centellis 4410 High performance features at entry-level price points
Fabric interface bandwidth options for 1/10GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.3 thermal compliance
More
42. Centellis 4620 14-slot, 19” (4420) and 16-slot, 23” (4620) 13U form factor
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
Combined switch/control blades to maximize billable application slots
More
43. Centellis 31KX High Availability Platform ATCA shelf to deliver 5NINES availability into central office environments
13U/19” chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More
44.
Centellis 4100 High Availability Platform ATCA shelf to deliver 5NINES availability into central office environments
13U/19" chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More
45.
Centellis 500 MicroTCA Platform Low profile, lightweight, solidly constructed injection molded plastic table-top or shelf placement chassis is easily transportable
Three (3) available AMC midsize expansion payload slots for application customization
Best-in-class MicroTCA Carrier Hub (MCH) and Intel Core 2 Duo processor AMC (PrAMC-7211)
Dynamic cooling for low noise enterprise deployment
More
46.
Centellis 1000 MicroTCA System Platform 11-slot MicroTCA shelf provides scalable, embedded communications computing system
19 in. (483 mm) wide, 7 in. (178 mm) high, 9.3 in. (237 mm) deep shelf with front-only I/O and 23 in. rack mount option
600 watt AC or -48 VDC power entry modules support full complement of AdvancedMCs
Redundant DC power entry modules, hot-swappable AdvancedMCs, and an easy-to-service design
More
47. Katana 2000 Commercial ATCA Bladed Server 3U, 19" dual nn server platform based on ATCA technology for high performance, high reliability computing
Supplied with one or two server blades each with two quad-core Intel® Xeon® 5500 series processor
Front-to-rear cooling to meet ASHRAE and IT best practice requirements
Support for power saving features enhancing energy efficiency
More
48. CPCI6200 PICMG 2.0/2.16 Processor Board 1.3 or 1.5 GHz Freescale MPC8572 dual core integrated processornn Integrated north bridge in the processor (no frontside bus)
2GB or 4GB ECC-protected DDR3-800
Four on-board Gigabit Ethernet interfaces Two serial ports
One USB 2.0 port Support for PICMG 2.16 CompactPCI Packet Switching Backplane specification
More
49.
CPCI7200 PICMG 2.0/2.16 Processor Board 1.06 or 1.5 GHz Intel Core2 Duo processor
533 or 667 MHz front side bus
Intel® E7520 + 6300ESB dual channel 3.2GB/s memory controller
2GB ECC-protected DDR2-400
More
50.
CPCI7145 PICMG 2.16 Processor Board 1.8 GHz Intel Pentium M processor
400 MHz frontside bus
Intel® E7501 dual channel 3.2GB/s memory controller
2GB ECC-protected DDR SDRAM
More
51.
CPCI7147 PICMG 2.16 Processor Board 1.4 GHz Intel Pentium M processor
400 MHz frontside bus
Intel® 855GME 1.6GB/s memory controller
2GB ECC-protected DDR SDRAM
More
52.
CPCI6190 Universal-Mode Processor Board PowerPC 750GX processor with core frequency of 1 GHz and 1MB L2 cache
Discovery GT-64260 system controller
Sentinel universal-mode PCI-to-PCI bridge
Up to 1GB high speed SDRAM main memory
More
53.
Katana752i Real-Time Processing Blade PowerPC 750GX processor running at up to 1GHz
cPSB Node (PICMG 2.16, Dual 1000 BaseT)
cPCI peripheral functionality
Dual PMC / PTMC expansion sites
More
54. CPCI-6020 Host Slot Processor Board 'MPC7410 PowerPC processor
High-performance L2 cache
High-performance, low-latency SDRAM subsystem
Up to 2GB of ECC protected capacity
More
55.
CPCI-6065 CPCI Processor Board with the PowerPlus II Architecture MPC7410 or MPC750 class processor
1MB or 2MB of L2 cache
Up to 1.5GB ECC SDRAM, with optional RAM500 memory expansion modules
Dual 10/100BaseTX Ethernet interface
More
56.
CPCI-6115 Peripheral Slot Compute Board Up to 1.0 GHz MPC7457 PowerPC processor with AltiVec technology for peak performance
Up to 2GB DDR ECC memory for peak computation power
Dual Gigabit Ethernet PICMG 2.16 interface connectivity
Additional Gigabit Ethernet interfaces for increased connectivity
More
57.
CPCI7070 with the Intel Pentium III Processor Board CompactPCI® host slot processor board
Intel® Pentium® III BGA2 processor
Intel® 440GX chipset
100 MHz frontside bus frequency
More
58.
CPCI-8200 CPCI Board with Multiple T1/E1 Spans Up to 504 full Voice over IP (VoIP) channels
High level software environment to reduce time-to-market
Network options for T1/E1, Gigabit Ethernet and PICMG 2.16
Field proven voice processing resources including echo cancellation and tone generation/detection
More
59.
CPCI-8205 CPCI Board for Voice Over IP Gateways Up to 882 full Voice over IP (VoIP) channels
High level software environment to reduce time-to-market
Network options for DS3, Gigabit Ethernet and PICMG® 2.16
Field proven voice processing resources including echo cancellation and tone generation/detection
More
60.
CPCI-8220/8221 Packet Voice Processing Blade TMS320C6415 DSP array providing over 500 channels of AMR voice coding
High performance PowerPC® processor for control and management
Network interfaces for DS3, Gigabit Ethernet and PICMG 2.16
Open telecom framework software
More
61.
CPX8216 CPCI 8-slot Platform Dual 8-slot backplane (CPX8216 models) or backplane with H.110 bus to all I/O slots (CPX8216T models) for high availability designs
A PowerPC® or Intel® Pentium® system controller CPU option allows the choice of the right processor for the application
Three 400W hot-swappable AC or DC power supply fan units provide N+1 redundancy
Front access service and installation of CompactPCI® boards, drives, fans, and power supplies for easy access to active components
More
62.
FACT-OR Voice Processing Software Advanced voice processing software environment
Extensive call processing functions for transcoding and service applications
Supports 3G CDMA/UMTS wireless and packet network voice standards
Open resource model and developers kit to modify or create new resources/algorithms
More
63. MATXM-C2-410-B MicroATX Motherboard Unique midplane
PoweredUSB ports
512MB to 8GB DDR3
LVDS and HDMI displays
More
64. Centellis 500 MicroTCA Platform Low profile, lightweight, solidly constructed injection molded plastic table-top or shelf placement chassis is easily transportable
Three (3) available AMC midsize expansion payload slots for application customization
Best-in-class MicroTCA Carrier Hub (MCH) and Intel Core 2 Duo processor AMC (PrAMC-7211)
Dynamic cooling for low noise enterprise deployment
More
65.
Centellis 1000 MicroTCA System Platform 11-slot MicroTCA shelf provides scalable, embedded communications computing system
19 in. (483 mm) wide, 7 in. (178 mm) high, 9.3 in. (237 mm) deep shelf with front-only I/O and 23 in. rack mount option
600 watt AC or -48 VDC power entry modules support full complement of AdvancedMCs
Redundant DC power entry modules, hot-swappable AdvancedMCs, and an easy-to-service design
More
66. MCH-1011/1021 MicroTCA Carrier Hub Module Full-size module designed to fit into MCH slot of MicroTCA platforms
SpiderWareM3 platform management software
Layer 2 unmanaged (or externally managed) Gigabit Ethernet switching to each of 12 payload slots
Two Gigabit Ethernet fabric expansion/uplink RJ-45 face plate connections
More
67.
MCH-1010/1020 MicroTCA Carrier Hub Module Full-size module designed to fit into MCH slot of MicroTCA™ platforms
Layer 2 unmanaged Gigabit Ethernet switching to each of 12 payload slots with front panel uplinks for external connections
Optional PCI Express switching with narrow or spread spectrum clock distribution for applications that require PCI Express capability
IPMI management functions
More
68.
SpiderWareM3 Platform Management Manage, Monitor and Maintain multiple MicroTCA platforms
Rapid Software Integration Designed for quick assimilation into other software applications
Quick Platform Set-up - Spend time on the important things
Asset Management - Identify all the platform and blade assets in a network
More
69.
Pm8540 ProcessorPMC module with Freescale 8540 PowerQUICC III integrated processor VITA32 ProcessorPMC
Freescale 8540 PowerQUICC III integrated processor
256 or 512MB Dual Data Rate DRAM
32MB Flash
More
70.
Pm8560 ProcessorPMC module with up to 8 E1/T1/J1 interfaces Processor PMC (VITA32-2003) with up to 8 software selectable E1/T1/J1 interfaces
Freescale Semiconductor
MPC8560 PowerQUICC III communication processor
Up to 512MB Double Data Rate SDRAM with ECC
More
71.
PrPMC2750 PowerPC 750GX processor at up to 1.0 GHz in single-processor configuration
Highly integrated Marvell Discovery II system controller
Up to 1GB DDR SDRAM memory
64-bit/66 MHz PCI bus interface
More
72.
PrPMC2800 High-performance symmetric multiprocessing (SMP) platform
MPC7447A PowerPC G4 processor running at up to 1.0 GHz in single or dual processor configurations
128-bit wide AltiVec technology support
Highly integrated Marvell Discovery II system controller
More
73.
PrPMC6001 MPC7448 PowerPC G4 processor running at up to 1.4 GHz
128-bit wide AltiVec technology support
Highly integrated Marvell Discovery III system controller
Up to 1GB DDR SDRAM memory
More
74.
PrPMC800 MPC7410 PowerPC microprocessor
AltiVec technology
Latest high-performance PowerPlus III Architecture
2MB/1MB of L2 cache
More
75.
PrPMC8150 MPC750FX microprocessor
High-performance PowerPlus III Architecture
Up to 512MB on-board ECC SDRAM
Up to 64MB on-board flash
More
76.
PPCBug Firmware Command-driven user-interactive software debugger. Debugging commands are available for loading and cuting user programs under complete operator control for system evaluation.
Command-driven diagnostic package for testing and troubleshooting.
Microprocessor, firmware, and hardware initialization routines. Products Running PPCBug Firmware:CPCI-6065 and the MVME5100.
77. More
PMCspan The PMCspan board allows users to customize their exact I/O requirements with Emerson's VME based CPU modules designed around the PowerPlus Architecture.More
78.
PmPPC440 PowerPC based ProcessorPMC AMCC PowerPC® 440GP processor running at 400MHz
Up to 133MHz PCI-X interface, backwards compatible with PCI 2.1
64MB, 128MB, 256MB, 512MB or 1GB DDR ECC SDRAM in SODIMM package
Dual 10/100BaseTX Ethernet interfaces with front bezel access
More
79.
PmPPC7448 PowerPC based ProcessorPMC Up to 1.4GHz PowerPC®
MPC7448 processor
Up to 2GB SDRAM in SODIMM packaging
Marvell Discovery III system controller
More
80.
PmPPC750f PowerPC based ProcessorPMC PowerPC 750FX processor running at 733MHz+
128MB, 256MB, 512MB or 1GB ECC SDRAM in SODIMM package
32/64-bit 33/66 MHz PCI with DMA
Three 10/100 Ethernet interfaces
More
81. AvantellisTM Middleware Deploy your high availability application quickly and efficiently with reduced time to market.
Reduce costs by eliminating the burden of building your own high availability base platform middleware or even maintaining your own distribution based on OpenSAF.
Orient your resources to work on the "revenue producing" application and not the non-differentiating high availability middleware.
Dedicated 24x7 support on open source based product when you need it.
More
82.
SpiderWareM3 platform management software reduces cycle time and lowers OpEx Manage, monitor and maintain multiple ATCA and MicroTCA platforms
Facilitate Rapid system integration
Quick platform set-up
Asset management – Identify all the platform and blade assets
More
83.
SpiderWare®SG: Standards-based Signaling Gateway solution for cPSB/2.16 and AdvancedTCA® .Turnkey solution for rapid integration and deployment
SS7 to
M2UA M2PA M3UA
M2UA <-> M3UA Interworking configuration option
More
84. SpiderWareSS7: 64 SS7 signaling channels on a single blade.64 to 128 SS7 channels per blade
Standardized STREAMSbased API
8 or 16 E1/T1 spans per blade
MTP1 and MTP2 SS7 layers
More
85.
SpiderWare Frame Relay: STREAMS-Based Frame Relay Implementation SpiderWare FRAME RELAY protocol stack is a STREAMS-based Frame Relay implementation based on the Frame Relay Forum, ITU-T and ANSI standards providing both PVC and SVC access to a Frame Relay Bearer Service. It implements the Local Management Interface (LMI), and support is provided for multi-protocol encapsulation as per FRF 3.1 (RFCs 1490 and 2427); IP over Frame Relay; dialup/switched access over ISDN, and SNMP MIBs.
More
86. MVME3100 System-on-chip Freescale MPC8540 with PowerPC e500 processor core, integrated memory controller, DMA engine, PCI-X interface, Ethernet, and local I/O
Two Gigabit Ethernet ports plus an additional 10/100BaseTX port
Up to 512MB of DDR333 ECC memory
USB 2.0 and Serial ATA controllers for integrating cost-effective peripherals
More
87.
MVME4100 1.3 GHz system-on-chip Freescale MPC8548E with e500 processor core, double precision floating point operations, integrated memory controller, DMA engine, PCI-X and PCI Express interface, Ethernet, and local I/O
2GB of DDR2 ECC memory, 128MB NOR flash and 4GB NAND flash
512KB of MRAM non-volatile memory
Four Gigabit Ethernet portsMore More
More
88.
MVME5100 MPC7410 or MPC750 microprocessor with 32KB/32KB L1 cache
Up to 2MB of secondary backside cache
100 MHz frontside bus
Up to 512MB of on-board ECC SDRAM – expandable up to 1GB with optional RAM500 memory expansion modules
89.
MVME5500 MPC7457 PowerPC processor at 1 GHz
256KB of on-chip L2 cache and 2MB of L3 cache
AltiVec coprocessor for high-performance computational applications
512MB of on-board 133 MHz SDRAM ECC memory and 512MB additional memory via a memory mezzanine card for a total of 1GB of memory
More
90.
MVME6100 2eSST VMEbus protocol with 320MB/s transfer rate across the VMEbus
MPC7457 PowerPC processor running at up to 1.267 GHz
128-bit AltiVec coprocessor for parallel processing, ideal for data-intensive applications
Up to 2GB of on-board DDR ECC memory and 128MB of flash memory for demanding applications
More
91.
MVME7100 System-on-chip Freescale MPC8641D with dual PowerPC® e600 processor cores, dual integrated memory controllers, DMA engine,
PCI Express interface, Ethernet, and local I/O
Four Gigabit Ethernet ports
Up to 2GB of DDR2 ECC memory, 128MB Nor flash and 4 or 8GB Nand flash
More
92.
XMCspan XMC Expansion Mezzanine Single-slot 6U VMEbus format
PLX PEX8533 PCI Express 6-port switch
Tundra Tsi384 PCI Express to PCI-X interface bridges
Support for two single-wide, or one double-wide XMC or PMC per XMCspan
More
93.
PMCspan The PMCspan board allows users to customize their exact I/O requirements with Emerson Network Power's VME based CPU modules designed around the PowerPlus Architecture.
94. More
