一．技術參數Technical parameters 吹灰角度 Sootblowing range 90°—360° 吹灰槍轉速 Potating speed of lance tube 2.5 r..P.m 每次吹掃圈數 Each time blows sweeps the turn 1圈或2圈（根據要求調整） 1 turn or 2 turn 最大吹灰半徑 Effective blowing radius 1~1.5m 吹灰介質 Blowing medium 蒸汽或壓縮空氣 Steam or compressed air 吹灰介質壓力 Blowing pressure 0.78~1.96MPa 吹灰介質耗量 Blowing steam consumption 30~100kg/min 電動機型號規格 Motor specification YSR—6324 B5型180W 1400r.P.m 380V 50Hz 3P 吹灰器重量 Weight ~75kg 二．產品特點 Product feature (1) 結構合理緊湊 Composition Suitability (2) 空心抽與閥門間的轉動密封結構 Sealing composition of shaft and valve (3) 接墻密封裝置能有效地進行密封 Effective sealing result of sealing seat system (4) 吹灰器滿足0~360°全方位吹掃 Blow in 0°~360° degrees range 三．適用范圍Applicable scope G3A-G9設計用于清掃固定式鍋爐、船用鍋爐、余熱鍋爐和油爐的受熱管表面的灰渣，安裝在其內部溫度低于吹灰槍管許用溫度的區域。G3A-G9也可用于清掃大型鍋爐的低溫?zé)煔鈪^(qū)域，包括再熱器、省煤器、煙氣循環和除塵器區域。 多噴嘴組件可用于分道吹灰和整體吹灰，以便更好地清潔鍋爐管表面區域。根據吹掃部位煙溫具體情況，吹灰槍管采用不同的材料。G3A-G9吹灰器每次吹灰時只需啟動一次，吹灰槍管旋轉，同時控制閥門開啟與關閉。G3A-G9吹灰器可改裝成不旋轉式吹灰器，用于吹掃某些有特殊要求的固定裝置，如風道、引風機和其它特種鍋爐 The G3A-G9sootblower is designed to remove ash deposits from tube surfaces in stationary boilers, marine boilers, waste heat boilers and direct-fired oil-heaters, where gas temperature zones inside the boiler permit a fixed cleaning element. The G3A-G9may also be used for cleaning low-temperature gas zones in large boilers, including reheaters, economizers, and gas recirculation and precipitator ducts. A multi-nozzled element is used in a lane blowing or mass blowing configuration for complete cleaning of the boiler tube surface area. Four element materials are available for different temperature requirements. The G3A-G9 blower requires only one operation to rotate the blowing element and simultaneously open and close the supply valve.