SRSJZ 系列錐形雙螺桿擠出機, 是一種適合于各類PVC粉料擠出成型的專用設備。SRSJYP系列新型高效平行異向雙螺桿擠出機是一種高效的混煉、擠出設備，具有剪切速率小，物料不易分解，塑化混煉均勻，產量高，質量優，自潔性好，適用范圍廣，使用壽命長等優點。本機用途廣泛，配備相應的螺桿、機頭、輔機可將各種熱塑性塑料、熱固性塑料和改性塑料從粉末狀態直接擠制成pvc管材、異型材、板材、片材、木塑、發泡片板材、棒材及造粒、薄膜，中空 等其它塑料PVC制品。螺桿采用油冷卻系統、水冷卻系統冷卻。機筒采用特殊設計的油冷/風冷系統冷卻，具有維修方便等優點，冷卻系統設計特殊，散熱面積格外大，冷卻迅速，溫度精度可達±1℃。減速箱采用立式結構，結構更緊湊，可靠性高，適用于PVC材料的加工。采用PLC溫控系統，常規設備采用溫控表系統，經濟實用，便于操作。根據用戶不同配方要求，配購最合適螺桿，以達到最佳塑化狀態及物流質量，使整機達到了最佳的比功率和比流量。螺桿全部采用高精度專用數控螺桿銑床加工，可確保每臺同類擠出設備擠出性能高度一致性。率先引進國際最先進便螺距、變深度、大長徑比螺桿設計技術，使物料在螺桿中剪切、壓縮更柔和，更接近實際需要。分配箱特殊設計，推力軸承格外加固，軸承采用原裝進口，傳動壽命高，可承受更大擠出壓力。本機還裝有定量喂料系統。主電機和喂料電機可分別采用交流變頻調速或直流調速系統。電器系統最大限度采用進口元件，并具有多項故障報警功能，操作方便。對螺桿、機筒和減速器有更高要求的客戶，還可選配歐洲原裝進口產品。
It's the special parallel extruder for all kinds of PVC powder material.it's high efficiency for mixing and extrusion,it has the advantages of low-speed cutting,hard decomposition of material,even mixing of plasticity,high output,good quality,self-cleaning,wide application range,long service life.It's a widely applied, if equipped with related Screw and other auxiliary accessories,based on the raw material of hot-plastics plastics,hot-coagulating plastic and rectified plastics,the following can be produced:PVC pipe, profile, plate, sheet, plastic-wood profile,foamed plate and sheet,rod profile, pelletizing, filming hollow PVC product.Screw is water and oil cooled,and the barred is oil/air cooled and can be cooled quickly;its temperature tolerance is ±1℃.The vertical gearbox is compact and high reliable,which is suitable for PVC production.Automatic PLC temperature is applied, and for common equipment,temperature gauges are employed.According different material prescription from the customers,proper screw is fitted to achieve the best plasticity state and material quality so as to gain the best specific power and specific flow.All the screws are machined by the special-purpose milling machines,which is vital for the accuracy of the extrusion.The world advanced variable screw distance technique and depth variable Screw technique are first applied ,which makes material cutting and compression more gently.Special design of distribution box,particularly reinforced thrust bearing,imported bearing,longlife drive and high impact resistance are the advantages.The machinery is equipped with dosing feeding system.Main motor and feeding motor can be controlled by AC frequency converters and DC speed control variable system.Most of the electrical elements are imported,it has lots of malfunction alarm function and it's easy operated.For those customers who require screw&barrel and gearbox critically,the European imported products would be a good choice.
