W-206APg - Outdoor Wireless LAN Access Point/ Bridge
With POE & 18dBi Path Antenna
IEEE
Acting as a AP/ bridge between the wired Ethernet and the 2.4GHz IEEE 802.11g/b wireless LAN, this wireless LAN access point can let your wireless LAN client stations access both the wired and the wireless network nodes.
WDS Bridge Mode (Repeater Mode) :
The WDS (Wireless Distributed System) function lets this access point act as a wireless LAN access point and repeater at the same time. Users can use this feature to build up a large wireless network in a large space like airports, hotels and schools etc. This feature is also useful when users want to bridge networks between buildings where it is impossible to deploy network cable connections between these buildings.
Station Mode (AP Client Mode) :
By setting this access point into station mode and connecting to a network device Ethernet port, it can let a network device that originally only supports wired Ethernet access the wireless LAN easily without changing any configuration.
Universal Repeater Mode:
The Universal Repeater Mode let the access point to act as a station to connect to the parent access point and at the same time act as an access point to service the stations within its coverage.
Robust Wireless LAN Security:
Except for the basic security control by using ESSID and 64/128 bit key length WEP encryption, this access point also supports the advanced security features, like MAC access control and hide ESSID. It provides a total solution for you to build up a secure wireless LAN network environment that can prevent from all kinds of hacker intrusion.
Patch Antenna:
This access point integrates with 18 dBi patch antenna that can l help you enlarge your wireless LAN coverage.
Features
Complies with the IEEE 802.11b (DSSS) 2.4GHz specification
Supports 2.400~2.4835 GHz frequency band, 1~14 channels
High data rate up to 54Mbps network speed, Works with all standard internet applications
Auto rate fallback in case of obstacles or interferences
Supports WPA/WPA2 security enhanced function
Supports WDS(Wireless Distributed System) bridge mode
Provides station mode to act as a wireless LAN client station
Provides universal repeater mode to act as a wireless station and access point at the same time
Supports roaming link integrity
Supports authentication for wireless connectivity based on ESSID
Provides 64/128 bit key length WEP data encryption
Provides MAC access control
Provides DHCP server
Supports Web-based configuration
Firmware upgradeable via Web
RJ 45 interface and Power over Ethernet
Built-in site survey to indicate signal strength.
Compact-size All in One design for easy installation
Pole/Wall Mounting, Outdoor Waterproof
Specification:
Compatible Standard:
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.11 b/g
IEEE 802.3 af
Network Interface: One 10/100Mbps up-link interface (RJ45 type)
802.11b/g wireless LAN interface
Maximal Transmit Power: 27 3dBm (
Sensitivity:-81 dBm (
-92 dBm (11b, 11Mbps # PER < 8%)
Antenna Gain (dBi): 18
Equivalent isotropically radiated power (EIRP): 48 dBm EIRP maximum.
Wireless Frequency Band:
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Wireless Transfer Rate: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps
(modulate automatically)
Administration Mode:User interface administration based on WEB
Support Protocol:TCP/IP, Bridging, TCP, UDP, WEB, HTTP, FTP, SNMP
Power: 48V DC,
Reset:Remote Reset/ Manufacture Reset
Antenna type:Patch
Polarization:Vertical or Horizontal
Horizontal Beam width: H:20
Vertical Beam width: E:20
F/B ratio (dB): ≥28
VSWR: ≤1.5
Range:802.11b, Bridge:
Dimension :305(H)x305(W)x75(D) mm
Weight (kg):
Pole Diameter (mm):40～50
Temperature:Operating :
Humidity:95% Non-Condensing
Weather: IP66
Certification: FCC, CE
