臺虎鉗是用來加持工件的通用夾具。裝置在工作臺上，用以夾穩加工工件，為鉗工車間必備工具。轉盤式的鉗體可旋轉，使工件旋轉到合適的工作位置。使用臺虎鉗的注意事項   1. 夾緊工件時要松緊適當，只能用手板緊手柄，不得借助其他工具加力。2. 不許在活動鉗身和光滑平面上敲擊作業3. 強力作業時，應盡量使力朝向固定鉗身。4. 對絲杠、螺母等活動表面應經常清洗、潤滑，以防生銹。
規格:用鉗口寬度來表示，常用規格有100mm，125mm，150mm等。
Bench Vise is used to hold the workpiece universal fixture. Device on the work table, to clamp the workpiece for stability, locksmith shop tools. Rotary clamp body can be rotated, so that the workpiece is rotated to the proper working position.
The use of bench vice matters needing attention
The 1 clamping workpiece to elastic appropriately, can only use the hand handle locking, do not use other tools afterburner. 2 not in the movable clamp body and a smooth plane hitting 3 strong operation, should try to make the force towards the fixed clamp body. 4 pairs of screw, nut and other activities should be frequently cleaned surface, lubrication, to prevent rusting.
Specifications: jaw width to express, commonly used specifications are 100mm, 125mm, 150mm etc..
更多詳情請登錄http://www.cnbtjg.com/