TCXO 10MHz CFPT-9003 EX 1 B E3195 E3410 +-0.5ppm  -40-+85C 5V SINE SMD7*5*2mm

ISSUE 7; 24 MARCH 2004

Recommended for New Designs

Delivery Options

I

Frequency Stability

I

I

I

Temperature: see table

Typical Supply Voltage Variation ±10%  < ±0.2 ppm*

Typical Load Coefficient 15pF ±5pF  < ±0.2 ppm*

*Dependant on frequency and output  type

Please contact our sales office for  current leadtimes

Description

I

A series of surface mountable 7.0  × 5.0mm TCXOs for

medium to high volume applications  where small size

and high performance are pre-requisites.  This oscillator

uses latest custom ASIC "Pluto",  a single chip

oscillator and analogue compensation  circuit, capable

of sub 1 ppm performance over an extended  tempera-

ture range. Its ability to function  down to a supply volt-

age of 2.4V and low power consumption  make it partic-

ularly suitable for mobile applications

Frequency Adjustment

I

Three options with external Control  Voltage applied to

pad 10:

A - Ageing adjustment: > ±5ppm,  frequency < 20MHz

                     (Standard Option)

> ±7ppm, frequency > 20MHz

B - No frequency adjustment initial  calibration @ 25°C

   < ±0.5 ppm

C - High Pulling ±10ppm to ±50ppm  can be available

   depending on frequency and stability options.

   Please consult our sales office

Standard Frequencies

I

10MHz

I

Linearity

Slope

Input resistance

Modulation bandwidth

Standard control voltage ranges:

Without reference voltage

Without reference voltage

With reference voltage

< 1%

Positive

> 100k?

> 2kHz

Output Waveform

I

I

I

I

I

I

Square HCMOS 15pF load

Square ACMOS 50pF max. load

(Available on request, contact sales  office)

Sinewave 10k? // 10pF AC-coupled,

Clipped sinewave 10k? // 10pF AC-coupled,

SURFACE MOUNT

   TCXOs

I

I

- Vs=5.0V 2.5V±1V

- Vs=3.3V 1.65V±1V

- Vc=0V to Vref

Supply Voltage

I

Operating range 2.4 to 6.0V, see table

Reference Voltage, Vref

I

Current Consumption

I

HCMOS Typically ≈

1+Frequency(MHz)*Supply(V)*{Load(pF)+15}*10-3  mA

E. g. 20MHz, 5V, 15pF ≈ 4mA

Sinewave Typically < 8mA

Clipped Sinewave Typically ≈

1+Frequency(MHz)*1.2*{Load(pF)+30}*10-3  mA

Optional reference voltage output  on pad 1, suitable for

potentiometer supply or DAC reference.

1. No output (Standard option)

2. 2.2V, for Min. Vs>2.4V

3. 2.7V, for Min. Vs>3.0V

4. 4.2V, for Min. Vs>4.5V

Maximum load current (mA) = Vref /10

I

I

Package Outline

I

7.0 x 5.0 x 2.0mm SMD (Surface mount  device)

ceramic carrier

For manual frequency adjustment connect  an external

50K? potentiometer between pad 1 (Reference  Voltage)

and pad 4 (Ground) with wiper connected  to pad 10

(Voltage Control). Please specify  reference voltage as part

of the ordering code

Tri-state

I

Ageing

I

I

I

I

I

±1ppm maximum in first year, frequency  < 20MHz

±2ppm maximum in first year, frequency  > 20MHz

Pad 8 open circuit or >0.6Vs output  enabled

< 0.2Vs Tri-state

When Tri-stated, the output stage  is disabled for all out-

put options, but the oscillator and  compensation circuit

are still active

(Current consumption <1mA)

I

±3ppm maximum for 10 years, frequency  < 20MHz

I

±5ppm maximum for 10 years, frequency  > 20MHz

±1ppm maximum after reflow