Applications
   ■ Chemical, petrochemical industry
   ■ Oil and gas industry
   ■ Power engineering, renewable energies
   ■ Machine building, plant and vessel construction

Special features
   ■ Economical temperature measurement "2 in 1"
   ■ Compact design
   ■ Application ranges from -200 ... +700 °C
   ■ "Plug-and-play", therefore no transmitter configuration necessary

Description
   At any point where the process temperature must be displayed locally and there is a requirement to simultaneously transmit the signal to a central controller or remote control room, the model TGT73 intelliTHERM? can be used.
   Through the combination of a mechanical measuring system and electronic signal processing, the process temperature can be read securely, even if the power supply is lost.
   Due to the wide variety of possible designs, the model TGT73 gas-actuated thermometers can be perfectly adapted to any process connection or location. The adjustable stem and dial version can be adjusted to any angle to allow easy reading.
   With the contact bulb version, temperature measurements are possible without any contact with the medium, even when the pipe diameter is extremely small.

   The WIKA electronic transmitter, integrated into the high-quality mechanical temperature gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.
   The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA.

Standard version

 Measuring principle
   Inert gas expansion system

Nominal size in mm
   100, 160