SKF TMEB 2將皮帶輪對中皮帶輪槽。 對中儀只有兩個裝置，即激光發射裝置和接收裝置，并通過V形導軌和強力磁鐵固定。 接收器上的三維目標區域使其易于檢測不對中，以顯示被測單元是否水平、垂直、平行或三者的結合。 操作員可容易地進行相應的調整。
Easy-to-use, requires no special training to operate
No trial and error: the laser position indicates the nature of misalignment allowing easy and accurate adjustment
Powerful magnets allow fast and easy attachment
Three-dimensional target area simplifies the alignment process
Facilitates simultaneous adjustment of tension and alignment
V-guides facilitate the alignment of a wide range of V-belt pulleys
A maximum operating distance of 6 meters (20 ft)
Special side adaptor allowing alignment of multi-ribbed and timing belt pulleys as well as chain sprockets is available as accessory
| Technical data | |
| Designation | TMEB 2 |
| Content | 1 laser unit 1 receiver unit 3 sets of V guides Carrying case |
| Housing material | Extruded aluminium |
| Type of laser | Diode laser, class 2, 1 mW |
| Laser wave length | 632 nm |
| Measurement distance | 50 mm to 6 000 mm (2 in to 20 ft) |
| Fixture | Magnetic |
| Measurement accuracy angular | Better than 0.2° |
| Measurement accuracy linear | Better than 0.5 mm |
| Dimensions laser unit | 70 x 74 x 61 mm (2.8 x 2.9 x 2.4 in) |
| Dimensions receiver unit | 96 x 74 x 61 mm (3.8 x 2.9 x 2.4 in) |
| Battery type | 2 x 1.5V LR03 (AAA) batteries in laser unit |
| Battery lifetime | 20 hours continuous operation |
| Weight laser unit | 320 g (11.3 oz) |
| Weight receiver unit | 270 g (9.5 oz) |
| Calibration certificate | Valid for two years |
| Warranty | 12 months |
| Accessory / spare parts | |
| TMEB A2 | Magnetic side adaptor for chain sprocket, multi-ribbed and timing belt pulleys |
| TMEB G2 | Set of V-guides, 4 different sizes |
掃一掃“二維碼”快速鏈接企業微店
推薦使用 微信 或 UC 掃一掃 等掃碼工具
微店融入移動互聯網帶來更多的商業機會。
