產品關鍵詞： 彩鋼瓦設備高速護欄設,

高速護欄設備技術參數

The guardrail equipment technical parameters

一，開卷機

A, uncoiler

1、單頭開卷機，單側放料

1, single head uncoiler, unilateral feeding

2、采用自動液壓內張緊

2, and the use of automatic hydraulic tensioning within

3、壓瓦機最大裝卷重量：8000KG

3, maximum outfit volume weight: 8000 KG

4、最大裝卷直徑：2200mm

4, with the biggest volume diameter: 2200 mm

5、液壓功率：3KW

5, hydraulic power: 3 KW

6、油缸直徑：120mm，工作壓力10Mpa

6, oil cylinder diameter: 120 mm, working pressure 10 Mpa

7、最大裝卷寬度500mm

7, maximum outfit roll width 500 mm

二、彩鋼壓瓦機成型

Second, forming

1、開料進入機組導向輪

1, opens the material into the unit guide wheel

2、整平為上三輥下四輥，成型軸直徑Φ80mm(材料45#通過調質處理)，軋輥材料為GCR15，淬火到HRC58°-62°，表面鍍硬鉻，壓制厚度2.5m-3.0m.

2, the whole flat for three rollers on the four roll, molding shaft diameter Φ 80 mm (material 45 # through the quenching and tempering treatment), roll materials for GCR15, quenching HRC58 ° to 62 °, the surface hard chromium plating, the suppression of thickness of 2.5 m to 3.0 m.

3、沖孔：采用液壓沖孔(材料Cr12模具鋼淬火處理，可前后左右任意調節)

3, punching: the hydraulic punching (material Cr12 quenching process, steel around to arbitrarily regulate)

4、切斷液壓剪切(材料Cr12淬火HRC60-62)

4, to cut off the hydraulic shear (material Cr12 quenching HRC60-62)

5、主機功率：15KW

5, main engine power: 15 KW

6、擺線針減速機功率：15KW

6, cycloid needle speed reducer power: 15 KW

7、傳動：鏈條傳動，2寸單排鏈

7 and transmission: chain transmission, 2 inches apart chain

8、彩鋼設備液壓站電機功率：15KW，壓力20Mpa

8, hydraulic pressure station motor power: 15 KW, 20 Mpa pressure

9、機組采用變頻調速5m-12m/min

Unit 9, the variable frequency speed 5 m and 12 m/min

10、變頻器，臺達

10, frequency converter, sets up to

11、電腦采用臺達PLC

11, computer using delta PLC

12、電腦操作面板采用觸摸屏顯示

12, computer operation panel using the touch screen

13、設備外形尺寸：長17.5m×寬1.2m×高1.5m

13, equipment configuration dimensions: long, 17.5 m x width 1.2 m × 1.5 m high

14、電器產地、品牌可選配。

14, electrical origin, brand optional.

三、c型鋼設備出料

Three, the material

簡易出料架

Simple a rack

1、此架由60mm×40mm方管焊接(上下可調節)

1, this rack is 60 mm × 40 mm square tube welding (up and down adjustable)

2、架上要裝滑動輪

2, want to install on sliding round

3、規格：長1.5m×寬0.9m×高0.6m

3, specifications: long, 1.5 m x width 0.9 m × 0.6 m high

產品關鍵詞： 彩鋼瓦設備高速護欄設,