Technical Data
Thermal Clad
?
MP-06503(MULTI-PURPOSE)
Bergquist
www.bergquistcompany.com
All statements, technical information and recommendations herein are based on tests we believe to be reliable, and
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to
replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product
for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR
MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT,
INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR
THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not
contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer.
PDS_MP_1113
The Bergquist Company -
North American Headquarters
Phone: 800-347-4572
Fax: 952-835-4156
The Bergquist Company -
European Headquarters
Phone: 31-35-5380684
Fax: 31-35-5380295
The Bergquist Company -
Asian Headquarters
Phone: 852-2690-9296
Fax: 852-2690-3408
Applications
? High watt-density applications where achieving
low thermal resistance is required
? Power conversion
? Heat-rails
? Solid state relays
? Motor drives
? LED applications
MET-4.5-01-40000 Test Thermal Performance of
Insulated Metal Substrates (IMS) TO-220 Set-up
High Power LED applications using Thermal Clad.
Please test this material in your application. Bergquist provides this engineering data for design guidance only. Depending upon
your application, the observed material performance may vary.
MP Typical Values
MP-06503 VALUE TEST METHOD
THERMAL PROPERTIES
Product Thermal
Conductivity
2.4 W/m-K MET 5.4-01-40000
Dielectric Thermal
Conductivity
1.3 W/m-K ASTM D5470
Thermal Resistance 0.09°C-in
2/W (0.58°C-cm
2
/W) ASTM D5470
Thermal Impedance 0.65°C/W MET-5.4-01-40000
Glass Transition 90°C ASTM E1356
Max Operating Temp. 130°C U.L. 796
Max Soldering Temp. 325°C U.L. 796
ELECTRICAL PROPERTIES
Dielectric Constant 6 ASTM D150
Dissipation Factor 0.003/0.017 (@1KHz/1MHz) ASTM D150
Capacitance 410 pF/in
2 (65pF/cm
2
) ASTM D150
Volume Resistivity 1
15?-m ASTM D257
Surface Resistivity 1
14 ?/sq ASTM D257
Dielectric Strength 2800 V/mil (112 kV/mm) ASTM D149
Breakdown Voltage 8.5 kVAC ASTM D149
MECHANICAL PROPERTIES
Color White Visual
Dielectric Thickness 0.003" (76 μm) Visual
Peel Strength@25C 9 lb/in (1.6 N/mm) ASTM D2861
CTE in XY/Z Axis <Tg 40 μm/m°C ASTM D3386
CTE in XY/Z Axis >Tg 110 μm/m°C ASTM D3386
Storage Modulus 12/0.3 GPa (@25°C/150°C) ASTM 4065
CHEMICAL PROPERTIES
Water Vapor
Retention
0.21% wt. ASTM E595
Out-Gassing Total
Mass Loss
0.29% wt. ASTM E595
Collect Volatile
Condensable Material
0.01% wt. ASTM E595
AGENCY RATINGS & DURABILITY
U.L. Maximum
OperatingTemperature
130°C U.L. 746B
U.L. Flammability V- 0 U.L. 94
Comparative
Tracking Index (CTI)
0/500 (425)
ASTM D3638/
IEC60112
Solder Limit Rating 300°C/60 seconds U.L. 796
詳情電話聯(lián)系：13829157230（微信同號）
