DN3系列手持式點焊機

DN3 Series Portable Spot Welding Machine

設備主要特點

1.該設備屬于電阻點凸焊機的一種，由機架結構，焊接變壓器，控制系統，水冷焊接電纜，點焊焊槍等幾部分組成。電氣主回路采用二極管可控硅無觸點開關，電路開關時間迅速，準確。焊接時間可通過控制系統精準調節，焊接重復性與一致性好，維護方便。

2.相對于DN系列電阻點凸焊機，具有體積小，重量輕等特點，機器下面配有四個滾輪，移動方便，同時使用時不需要氣壓，配有2米長的通水焊接電纜及手持式點焊槍，操作起來特別靈活，方便，選用不同的焊鉗，可以實現手提式鉗式點焊，單面單點點焊等功能。

3.焊接范圍一般為0.1mm---4.0mm的低碳鋼，碳鋼，鍍鋅板，不銹鋼等多種金屬，廣泛應用于各種板金，箱體，柜體，鐵質家具，不銹鋼廚房制品，不銹鋼門業制造及鐵絲鋼絲網片漏焊之后的重新補焊等的焊接。

Main Application Characteristic

1.The device belongs to one kind of resistance spot projection welding machine, it is composed of the machinery frame structure, welding transformer, control system, water-cooling welding cable and welding torch, etc. The main electrical circuit adopts the diode thyristor(SCR) contactless switch, to make sure the circuit switch time rapidly, accurately. The control system can precision adjust welding time precisionly,welding repeatability and welding consistency are both very good,also easy maintenance.

2.Compare to the DN Series Resistance SpotWelding Machine,DN3 Series Portable Spot Welder has the advantages of small volume, light weight and other characteristics,install four rollers to the machine to make sure it can move conveniently,furthermore no needair pressure to operate it.

By the 2meters length water-coolingwelding cable and hand-held spot welding gun,the operation is quite flexible, convenient.Using different welding guns,it can realize portable clamp type spot welding, single spot welding etc.

3.Generallyfor low carbon steel, steel, galvanized steel, stainless steel and other metal,Its welding range is 0.1mm---4.0mm.

It is widely used in all kinds of sheet metal,steel box and cabinet,iron furniture,stainless steel kitchen products,stainless steel door manufacturing andsteel wire mesh reweld for leakage weldingetc.

技術參數

Technical Parameter