110IMX35D15D15-8 DC/DC模塊電源，采用工業標準尺寸封裝和引腳定義，分全灌膠封裝和開版結構兩種封裝，具有良好的導熱和散熱能力，可將功率器件產生的熱量迅速地傳遞到外部空間大大降低了產品的溫升，提高了產品的可靠性并延長了其使用壽命。該產品主要用于鐵路 軍工和電力等要求可靠性能比較高，環境比較惡劣的環境下，能在惡劣環境下可靠工作！

詳細技術指標書，請聯系我公司索??！

Features
? RoHS lead-free-solder and lead-solder-exempted
products are available.
? Extremely wide input voltage ranges up to 150 VDC
? 4 outputs up to 60 V
? 1200 to 1800 VAC i/o electric strength test
? Electrical isolation between outputs
? Programmable input undervoltage lockout
? Shutdown/inhibit input
? Adjustable output voltages with flexible load distribution
? Frequency synchronization
? Outputs no-load, overload, and short-circuit proof
? Operating ambient temperature from –40 to 85 ° C
? Thermal protection
? Low profile: 10.5 mm or 8.9 mm with open frame
? Basic insulation
? Flexible output possibilities between 5 V and 60 V
Table of Contents Page Page
Safety-approved to IEC/EN 60950-1 and UL/CSA
60950-1 2 nd Ed.

The IMX35 Series of board-mountable, 35 Watt DC-DC converters has been designed according to the latest  industry  requirements and standards. The converters are particularly suitable for use in mobile or stationary applications in
transport, railways, industry, or telecommunication, where variable input voltages or high transient voltages are
prevalent.
Covering a total input voltage range from 9 V up to 150 V with 4 different models, the converters are available with up to four electrically isolated outputs from 5 V to 60 V, externally adjustable and with flexible load distribution. A shutdown input
allows remote converter on/off. Features include consistently high efficiency over the entire input voltage range, high
reliability, and excellent dynamic response to load and line changes.
The converters are designed and built according to the international safety standards IEC/EN/UL 60950, and approved by TüV and CSA. The converters provide basic insulation.

The circuit is comprised of 2 planar magnetics devices, and all components are automatically assembled and securly soldered onto a single PCB without any wire connection.Magnetic feedback ensures maximum reliability and repeatability in the control loop over all operating conditions. Careful considerations of possible thermal stresses ensure the absence of hot spots providing long life in environments, where temperature cycles are present. The thermal design without using any potting material allows operation at full load up to an ambient temperature of 71 °C in free air and operation up to 105 °C with airflow. For extremely high vibration environments the case has holes for screw mounting.