?8?4 Wide input voltage range: 8V–14V ?8?4 Programmable key features ?8?4 A voltage out range of 0.7V–2.75V at 0 to 60A. ?8?4 Efficiency greater than 92% with a built in heat sink. ?8?4 Three phase 500KHz switching for low ripple noise. ?8?4 Flexible Fault Response features ?8?4 Multiple turn-on/off slew rates and delays ?8?4 Digital Filter Compensation ?8?4 Synchronous operation with other supplies ?8?4 Real time performance monitoring ?8?4 GUI based configuration for short development time. ?8?4 Low height of 1.1” suitable for 1U high enclosures ?8?4 UL 60950-1/CSA 22.2 No. 60950-1-07 Second Edition, IEC 60950-1: 2005, and EN 60950-1:2006
DESCRIPTION
Power-One’s DP8160G is a second generation intelligent, fully programmable multi-phase step-down point-of-load DC-DC converter integrating digital power conversion and intelligent power management. It works with the DM7300 Series Digital Power Managers (DPM) which provides for synchronizing all system Power-On-Load regulators, for an elegant, flexible, low noise power system solution. All key parameters, sequencing, tracking, fault protection, and compensation parameters of the DP8160G are all programmable via Power-One's I 2 C based GUI. All settings can be changed by a user at any time during product development and service. Once programmed, the DPM remembers all settings and configures the DP8160G through a self-clocking single wire communication bus. FLASH memory in the DPM allows changes to be made without the need to solder or rewire the regulator.