杜笙tulsion? a-32 fine mesh
iso-9001/iso-14001/ohsas-18000
quot;堅韌膠凝體“精細型強堿性陰離子交換樹脂ii型
tulsion? a-32 fine mesh 是一款包含季胺ii型官能團的聚苯乙烯架構的“堅韌膠凝體”強堿型陰離子交換樹脂。
tulsion? a-32 fine mesh 由于本身的無裂紋特性而具有優良的物理特性。
tulsion? a-32 fine mesh比i型樹脂的堿性稍低，因此在和i型樹脂有相同的再生程度的時候，有更高的再生效率和操作能力。
tulsion? a-32 fine mesh 主要應用在強酸和弱酸的去除，并且再生效率高。然而由于其較低的堿性，當和氫型強酸型陽離子交換樹脂tulsion? t-42一起用在雙床系統上時，硅的泄漏量稍高于i型樹脂。它可以在較大的ph范圍和溫度條件下運行。
tulsion? a-32 fine mesh的球面是無裂紋的，因此它表現出非常高的球強度。
tulsion? a-32 fine mesh 出廠為氯型。
典型特性（typical characteristics）： tulsion? a-32 fine mesh
類型/type 強堿型陰離子交換樹脂/strong base anion exchange resin
主體結構/matrix structure 聚苯乙烯共聚物/polystyrene copolymer
官能團/functional grou 季胺ii型/quatemary ammonium type ii
離子形態/ionic form 氯型/chloride
物理型式/physical form 濕潤球狀/moist spherical beads
目數/screen size uss (濕) 50 to 140
粒度/particle size(95% minm.) 0.1 - 0.3 mm
交換容量total exchange capacity(minm.) 1.3meq/ml
膨脹率/swelling(approx) cl- to oh- 12%
濕度/moisture content 47±3%
反洗穩定密度/backwash settled density 690 - 720 gm/lit(43 - 45 lbs/cft)
最大溫度/maximum thermal stability 60℃（140℉）
ph范圍/ph range 0- 14
溶解性/solubility 不溶/insoluble in all common solvent
操作條件特性（typical operating conditions）： tulsion? a-32 fine mesh
樹脂床高度/resin bed depth 600 mm(24″)
最大流速/maximum service flow 60m3/hr/m3
逆洗膨脹空間/backwash expansio ace 50 - 70%
逆洗膨脹空間/backwash expansion flow rate(25℃) 5 - 10m3/hr/㎡
再生劑/regenerant naoh
再生程度/regeneration level 40 - 60 g naoh/l
再生濃度/regeneration concentratio 4 - 5%
再生時間/regeneration time 30 - 60 分鐘
操作溫度/maximum operating temperature 60℃ max
沖洗流速/rinse flow rate: 慢/slow 再生流速/at regeneration flow rate
快/fast 工作流速/at service flow rate
沖洗體積/rinse volume 4 - 10m3/m3
測試（testing）： tulsion? a-32 fine mesh
離子交換樹脂的抽樣和測試是按標準的測試程序，即astmd - 2187和is - 7330，1998.
包裝（packing）： tulsion? a-32 fine mesh
super sack 1000 lit super sack 35 cft
ms drum 180 lit. ms drum 7 cft
hdpe lines bag 25 lit. hdpe lines bag 1 cft
for handling, safety and storage requirements please refer to the individual material safety data sheets available at our offices. the data included herein are based on test information obtained by thermax limited. these date are believed to be reliable, but do not imply any warranty or performance guarantee. tolerances for characteristics are per bis/astm. we recommend that the user should determine the performance of the product by testing on his own processing equipment.
for further information, please contact:：
