1、注塑模具合攏:注塑機得鎖模系統將模具合上。鎖模系統一般系用直接油壓式或油壓機械鎖鏈式兩種。濟南注塑模具http://www.sdlqmj.com/
1, the injection mold closed: injection molding machine clamping system will die together. Clamping system general system with direct hydraulic type or hydraulic mechanical lock chain of two.
2、注塑模具鎖緊:當注塑模具合攏后 注塑機的鎖模系統將所需的鎖模力作用在注塑模具上,是注塑模具型腔在填充過程中,高壓的塑料不會將注塑模具漲開。
2, injection mold lock: when the injection mold after folded Clamping system of injection molding machine will be needed for the clamping force on the injection mold, injection mold cavity is in the process of filling, high pressure plastic should not increase the injection mold.
3、模腔填充:注塑機螺桿推進吧熔融塑料壓到模腔,螺桿推進通常是不旋轉的,在此過程中壓力損失相對很小,并且螺桿的推進速度也可以隨設置的不同而多次改變,這要視產品的實際注塑工藝需要而定。模腔填充、保壓和冷卻階段對注塑產品的質量影響最為直觀和重要。
3, cavity filling: injection molding machine screw propulsion molten plastic into the cavity pressure, the screw propulsion is usually not rotating, the pressure loss in the process is relatively small, and the advancement of the screw speed can also be changed for many times, according to the set of different this would depend on the product of the actual injection molding process need. Cavity filling, pressure maintaining and cooling stage to influence the quality of injection molding products the most intuitive and important.
濟南注塑模具http://www.sdlqmj.com/
濟南借款http://www.jncgjm.com/
山東電爐http://www.jinandianlu.com/
果木烤鴨加盟http://www.pjkyjm.com
紙袋廠家http://www.jnqcsl.com/