1、上料、混合：通過上料系統將定量的水泥、發泡劑、穩泡增強劑加入攪拌機，干混30秒鐘；

　　1, feeding, mixed: through feeding system will be quantitative strengthening agent, foaming agent, stabilizing bubble cement mixer, the dry mixing 30 seconds;

　　2、攪拌：將定量的溫水加入攪拌機，濕攪拌2分鐘;將定量的發泡劑加入攪拌機攪拌8-15秒鐘；

　　2, mixing, adding quantitative water mixer, wet mixing 2 minutes; The quantitative foaming agent to join mixer mixing 8 to 15 seconds;

　　3、注模、發泡：隨即將漿料注入模具內發泡，發泡過程約3-5分鐘；聚氨酯噴涂機廠家www.mxfpj.cn/

　　3, injection molding, foaming, then will be foam slurry injection mould, foaming process about 3-5 minutes;

　　4、初期養護：注模完成后靜置若干小時進行初期養護；

　　4, initial curing: injection molding to stand for a certain number of hours after the completion of initial curing;

　　5、脫模：待發泡水泥保溫板完成初凝，具備初期強度時即可脫模；山東轎車托運www.jnletu56.com/

　　5, demoulding: steam bubble cement insulation board to complete the initial setting, with early strength can release;

　　6、切割：具備一定強度的發泡水泥保溫板毛坯脫模后即可進行切割，切割規格根據需要調整切割刀片進行;7、成品養護：發泡水泥保溫板養護齡期應不低于7天。

　　6, cutting: have a certain strength of foamed cement insulation board blank can be cut after demoulding, cutting specifications according to the need to adjust the cutting blade; 7, product maintenance: foamed cement insulation board curing age should be not less than 7 days.