轉臺式拋丸機主要適合中小型工件的表面清理的批量生產，這規格的設備適合于發動機連桿，齒輪，膜片彈 簧等，廣泛應用于鑄造和汽車制造業，具有生產效率高，密封效果好，結構緊湊，裝卸件方便技術含量高等特點。

東莞德砂機械設備有限公司是一家從事自動化拋丸設備的專業生產廠家。德砂機械已有13年的自動化拋丸設備生產歷史。擁有一批在機械、電氣上才華橫溢的產品設計和質量管理人才，以現代化的加工制造手段和國際產品質量管理體系配合全方位的售后服務，為德砂贏得了廣闊的市場前景。    

前軸用專用處理設備，是根據用戶要求設計的一種新型專用拋丸清理設備，用于長條形異形工件，像圓柱型工件、小型圓簧、軸承等工件的清理強化。

QGL1500-800 Special processing equipment for former axle with functional module is a new designed appropriative shot blast machine.And is suitable for surface cleaning and strengthening in rectangle and special form workpiece such as cylinder workpiece ,small cylinder spring ,bearing etc.

本設備拋丸量更大，密封性更好，清理效果、生產效率及除塵效果有了較大的提高，維護費用減少了約60%。

This type shot blast machine have larger capacity,and better sealing effect,and with good cleaning effect ,higher productivity,less

environment pollution ,and maintenance cost reduce sixty percent.

通過拋丸清理強化，不但可以去除工件表面的銹蝕、氧化皮、鑄造后的型砂等，還可以降低工件的內應力，提高工件的抗疲勞強度。本機可單機使用也可配線使用，具有較高的清理效率。本機具有以下特點：

  After surface cleaning and strengthening,that’s not only suitable for surface rust and oxidation skin removal and cleaning casting module-sand ect.but also suitable for the elimination of stress concentration and enhance anti-fatigue of nlthe work piece .the machine can be used not only as a single machine ,but also as a part of a line.

? 可直接裝卸了，不需要反轉共工件

  Direct loading and unloading, need not turning over the workpiece

? 采用倍受歡迎的無地坑形式，節省了地坑基礎的施工費用

  Using popular no pit form , Save the foundation pit construction cost

? 拋丸室體及拋丸器的布置方式均經過計算機三維動態拋射仿真后確定，使拋出的彈丸流的覆蓋區準確的覆蓋工件表面，彈丸從工件的各個方向同時拋向工件的表面。

  The shot blast cabin and the arrangement of the shot blast unit are designed by Computer 3d dynamic simulation. Let the abrasive shoted out coverage of workpiece surface covered accurately,and the abrasive from different direction

shot to different surface of  the work piece.

? 采用全球領先技術生產的130-4RK系列大功率軸座式拋丸器，能顯著地提高清理效率、獲得滿意的清理效果，軸承全部采用美國BARDUN ?（原裝進口），彈丸利用率提高15%，抗磨壽命提高60%，維護費用減少50%。

The 130-4RK type large power shot blast unit Using world development technical ,that could raise productivity and get satisfactory clean effect. Using BARDUN ? bearing,Operating factor of shot blast abrasive raise fifteen percent .

Operating factor of wearing parts service raise sixty percent,maintenance reduce fifty precent .

? 采用布袋式除塵器，較厚的過濾材料減低排放和提高工人的勞動環境。

Adopting bag type dust collector, thickness of letting dust lows national standard,and improving work condition.

? 機器設計構思新穎，使用維修方便，可單機使用也可配線使用。

With novel design the machine can be maintenanced easy and can be used not only as a single machine ,but also as a part of a line.

? 輸送機構具有正反旋轉的功能。

The workpiece transmission system can turning corotation and reverse.

? 本機具有故障自動檢測裝置，采用先進的瑞士GF技術，從而使本機具有結構先進，設計合理，運行可靠，生產效率高等特點。

This machine have the equipment of failure automatic check.adopting advanced +GF+technology,so the product have advanced and reasonable design.operating safety,and high productivity.

二、工作過程 working process

連鎖啟動—上料—進入拋丸室—檢測工件位置—系統自動輸送并記憶工件位置—拋丸器啟動—彈丸閘門打開—清理正在輸送的工件—工件出拋丸室—由輸送機輸送—上卸料可同時進行丸料循環，該設備可連續工作。

Locking start —loading—workpiece transported into the shot blast cabin—check the workpiece position—transported and remember the workpiece  actual position by the automatic system of the equipment— start the shot blast unit —abrasive cage open—shot the transporting workpiece—workpiece drawed out off the cabin —using unloading roller chain transport—during loading and unloadingd period