PE防靜電袋是由低密度聚乙烯（LDPE）+線性型低密度聚乙烯（LLDPE）+抗靜電母料+色母+穩定劑混合吹塑成型，然后熱封切斷成型。該產品具有普通PE袋所有特性及防靜電功能。其材料手感較柔和，厚度可自由調節，在印刷電路板等一般電子產品中廣泛使用。作為外包裝既節約成本又可以保護電子產品不會因絕緣體之間相互摩擦而產生靜電損壞電子組件。該防靜電袋是印刷電路板的最佳包裝材料,使印刷電路板的靜電產生得到可釋放,避免損壞。技術指標如下:符合MIL-B-81705B；內外表面電阻是10⁸Ω--≤10¹¹Ω。 靜電釋放時間小于2秒。可根據客戶的規格要求制成片材,卷材,平口袋,信封袋。顏色也可根據客戶要求定做。

Anti-static PE bag is first blow molded out from the compound of LDPE, LLDPE, anti-static additive, color pigment and stability ingredient , and then hot sealed and cut into bags. This product has anti-static function as well as all characteristics that the common PE bag has. Its material fells very soft and the thickness can be adjusted freely, which made it widely used to pack general electronical products like printed circuit board. As an over-wrap, on one hand, it can economize cost, on the other hand, it can keep electronic components away from static damage caused by insulator rubs mutually. It is the best choice for packaging PCB, for it can keep the PCB away from being damaged by effectively and timely releasing the static generated on the PCB. Its technical indexes as following: method MIL-B-81705B; inner and outer surface resistance is between 10⁸Ω and 10¹¹Ω; time needed for static removal is less than 2 seconds. In accordance with customers’ required specification it can be make into sheet, coil, bottom seal bag and envelope bag. And in terms of color it can be customized made