GDS-50秒表檢定儀是一最新用的時間檢定儀，供各級計量部門，工廠，院校及科研單位檢定各種秒表、毫秒儀，機械秒表等，性能符合檢定規程的要求。
技術指標：
1、檢定電子秒表和機械秒表：
在1－99999秒內可任意置數
準確度±（2＊10－7＊輸出時段）秒±0.003秒
2、檢定電子毫秒儀（正負兩組輸出）
在1－99999秒內可任意置數，最小輸出100微秒
準確度±（2＊10－7＊輸出時段）秒±0.003秒
3、檢定電秒表（適合新規程JJG237-95）
在1－99999秒內可任意置數
指針式準確度：電同步＜±0.6毫秒
數字式準確度：±（2＊10－7＊輸出時段）秒±0.006秒

The calibrator is a precision instrument calibrating mechanicalstopwatch, electronic stopwatch, and 405/407/408/415/417 type pointerelectric stopwatch. The SF2001 stopwatch calibrator is compliant with thestopwatch calibration procedure JJG 237-2010 issued by the NationalMetrological Bureau. It could be used at metrological department at alllevels, factory, institutions and all research institutes tocalibrate electric stopwatch (405,407,408,415/417), mechanical stopwatchand digital quartz electronic stopwatch. The instrument is fully digitallycontrolled, high reliability,high accuracy, complete functions, convenientoperation, and strong anti-interfere
ability.
GDS-50 stopwatch calibrator andits accessories:
1)GDS-50 stopwatch calibrator       1 piece
2) Three-core power cord              1 piece
3) Dual banana plug test lead         2pieces
4) BNC-banana test lead                1 piece
5) Soft copy of User’s Guide           1 piece

1.1 Crystal Oscillator
Nominal frequency: 5MHz
Daily aging rate: ≤5×10 -9 /day
Second stability: ≤5×10 -10 /s
Accuracy: ≤1×10 -7
Warming-up time: over 2 hours
1.2 Calibrate mechanicalstopwatch and electronic stopwatch (T0is inputted calibration period of time)
Input range: T 0 :1s-99999s
Accuracy: better than ±(1×10 -7 ×T 0 +3ms)
1.3 Calibrate electricstopwatch
Pointer:
Input range:
Continuous: T 0 :0.1s-99999s
Trigger state: T 0 :1s-99999s
Pause state: T 0 :0.1s-99999s
Accuracy: better than ±(commercial power frequency accuracy×T 0+0.6ms)
1.4 Calibrate millisecondcounter and digital electric stopwatch
Input range: T 0 :1×10 2 μs-1×10 9 μs
Accuracy: better than ±(1×10 -7 ×T 0 +3μs)
The SF2001 calibrator is fully compliant with the mechanicalstopwatch and digital quartz stopwatch calibration procedure, electricstopwatch calibration procedure, and electronic millisecond countercalibration procedure, issued by the National Metrological Bureau.

2.1 Working conditions
Voltage: 220(1±10%)V;
Frequency: 50(1±5%)Hz;
Power consumption: <60VA;
Temperature : 0~40℃;
Humidity: <80%
2.2 Mechanical characteristics
Dimension: 329mm×283mm×155mm Weight: 3.7kg
2.3 Operation characteristics: Input with keys, menu display
2.4 Display mode: LCD display,English menu
2.5 Technique: With SMT technique and large-scale IC, the calibrator is ofhigh reliability, small volume and long service life.