改變了以磚、瓦、灰、石為首要的修建資料格式，呈現了鋼構彩板結構修建。這一修建結構的呈現使電廠汽輪機廠房、汽車制造業、飛機制造業、大型廠房、大型各種超市、物流倉庫等廣泛采用。這種修建結構最大長處是施工周期短、修建物資料輕、根底要求條件低、可以大跨度、室內空間大、使用方便等。但也存在必定的問題，首要問題是：屋蓋、鉚釘處、板縫處有滲漏現象，影響到正常使用。

The construction material format of brick, tile, ash and stone has been changed, and the construction of steel structure has been presented. The construction of this structure makes steam turbine powerhouse, automobile manufacturing industry, aircraft manufacturing industry, large workshop, large variety supermarket, logistics warehouse and so on. The biggest advantages of this structure are short construction period, light materials, low requirements for foundation, large span, large indoor space and convenient use. But there are also some problems, the first problem is: leakage of roof, rivet and seam, affecting normal use.

面臨彩鋼板屋面滲漏的解決辦法：

The solution to the leakage of the roof of the color steel plate is to be solved.

一、鉚釘處漏水修理辦法：

1. The repair method of water leakage at the rivet:

使用陽光2000PA單組份防水膠涂刷4次，厚度大約1.5㎜左右，直徑Φ60㎜左右，下一次涂刷以上一次涂層不粘手為準，并一次比一次涂的直徑大Φ15㎜，呈中心厚圓周薄。

Use the sunlight 2000PA single component waterproof glue to brush 4 times, the thickness is about 1.5. The diameter is about 60, the next time the coating is not adhered to the coating, and the diameter of the coating is larger than the diameter of the diameter, and the thickness is thin in the center.

二、接縫處漏水修理辦法：

Two, the repair method of water leakage at the seam:

1、小接縫修理辦法：

1. Repair methods for small seams:

①可在縫處兩頭涂刷寬60㎜陽光2000PA單組份防水膠，縫附近20㎜不涂。

One can apply 60 2000PA of sunlight to the two ends of the seam, one component waterproof glue, and 20 not to be painted near the seam.

②無紡布(或玻璃纖布)，布寬150㎜，粘貼在涂陽光2000PA防水膠上面。

(2) non-woven fabric (or fiberglass cloth), 150 2000PA wide and pasted on the sun coated waterproof adhesive.

③在無紡布或玻璃纖布上涂刷3遍,涂刷時后一遍比前一遍寬50㎜,厚度1.8㎜左右。后一次涂刷以上一次涂層不粘手為準。

(3) brush 3 times on non-woven or fiberglass cloth. After painting, it is 50 times wider than the previous time, and the thickness is about 1.8. The last coating should not be sticky.

2、板接縫較大修理辦法：

2, the large repair method of the plate joint:

①可往縫中填嵌DM-600?密封者?PU?密封膠

(1) can the sealer be filled with DM-600? Sealer? PU? Sealant

②在縫處兩頭涂刷寬60㎜陽光2000PA單組份防水膠,縫附近20㎜不涂。

2. At the ends of the seam, apply 60 2000PA of sunlight to a single component of waterproof glue, and 20 or not near the seam.

③無紡布或玻璃纖布，布寬150㎜，粘貼在涂陽光2000PA防水膠上面。

3. Non-woven or fiberglass cloth, 150 2000PA wide, pasted on the sun coated waterproof adhesive.

④在粘貼的布上涂刷3遍陽光2000PA單組份防水膠。涂刷時后一遍要比前一遍寬50㎜，厚度1.8㎜左右，呈中心厚兩頭薄，后一次涂刷以上一次涂層不粘手為準。陽光2000PA單組份防水膠,縫附近20㎜不涂。

(4) rub 3 times of sunshine 2000PA single component waterproof glue on the cloth. After painting, it should be 50 times wider than the first time, and the thickness is about 1.8. The thickness of the two ends is thin. Once the coating is applied above, the coating is not sticky. Sunshine 2000PA single component waterproof glue, 20 or not near the seam.

濟南富興彩鋼有限公司

聯系方式：15098902170&濟南合成樹脂瓦

聯系人：張經理

郵編：250001

公司地址：濟南市天橋區建材市場田黃路184號

濟南裝飾瓦：http://www.jnfxcg.com/

魯商云:http://www.lushangyun.com/

諾商商道系統，-專業互聯網應用服務提供商：www.chinanovo.net/

諾商商道系統，-專業互聯網應用服務提供商：www.cn-un.net/

諾商基于多年的優化經驗和品牌基礎推出的諾商商道系統，諾商信息您身邊的互聯網專家!