微波干燥器江蘇SKF軸承高溫的原因是：潤滑油的質量與要求或劣化不一致，潤滑油粘度過高；裝配過緊（間隙不足）；軸承微波干燥機組裝緊密，微波干燥機的環在軸或殼上旋轉，負負荷過大；微波干燥器保持架或滾動體破碎。

The reasons for the high temperature of the microwave dryer Jiangsu SKF bearing are: the quality of the lubricating oil is not consistent with the requirement or deterioration, the viscosity of the lubricating oil is too high; the assembly is too tight (the gap is insufficient); the bearing microwave dryer is assembled tightly, the ring of the microwave dryer rotates on the shaft or shell, the negative load is too large; the microwave dryer holder or the rolling body is broken.

微波干燥江蘇SKF軸承噪聲：滾動微波干燥器江蘇SKF軸承在工作中允許輕微的操作聲，如果噪聲過大或有異常噪聲或沖擊聲，則微波干燥器江蘇SKF軸承失效。

Microwave drying Jiangsu SKF bearing noise: rolling microwave dryer Jiangsu SKF bearing in the work allows a slight operation sound, if the noise is too large or have abnormal noise or shock sound, the microwave dryer Jiangsu SKF bearing failure.

微波干燥器中噪聲的原因較為復雜。

The cause of noise in the microwave dryer is more complicated.

1）江蘇SKF軸承在微波干燥器環內外的表面磨損。由于這種磨損，它破壞了江蘇SKF軸承與微波干燥器外殼、和微波干燥器軸之間的關系，導致軸偏離正確位置，在高速運動過程中產生異常聲音。

1) the surface wear of Jiangsu SKF bearing inside and outside the ring of the microwave dryer. Because of this wear, it destroys the relationship between the Jiangsu SKF bearing and the microwave dryer shell, and the shaft of the microwave dryer, causing the axis to deviate from the correct position and produce abnormal sound during the high speed movement.

豎井。當微波干燥器的軸承疲勞時，微波干燥器表面的金屬剝落也會引起微波干燥器徑向游隙的異常增加。

A shaft. When the bearing of the microwave dryer is fatigued, the metal exfoliation on the surface of the microwave dryer will also cause abnormal increase in the radial clearance of the microwave dryer.

2）江蘇SKF軸承在微波干燥器中的潤滑不足、干摩擦和江蘇SKF軸承的微波干燥器損壞會產生異常的噪聲。

2) the lubrication of Jiangsu SKF bearing in microwave dryer, dry friction and damage of microwave dryer of Jiangsu bearing SKF will produce abnormal noise.

3）微波干燥機松動松動后，保持架松動、損壞，也會對異常噪聲微波干燥器的軸承造成損壞。

3) after the loosening and loosening of the microwave dryer, the cage is loose and damaged, and the bearing of the abnormal noise microwave dryer will also be damaged.

對微波干燥機進行江蘇SKF軸承拆卸和檢查時，可根據微波干燥器軸承的損壞情況判斷微波干燥器江蘇SKF軸承的故障。

When the SKF bearings in Jiangsu are disassembled and checked for the microwave dryer, the failure of the SKF bearing in the microwave dryer Jiangsu can be judged according to the damage of the bearing of the microwave dryer.

4、微波干燥機軸承燒損：微波干燥機江蘇SKF軸承軸承滾道，滾動體有回火顏色。燒傷的原因通常是潤滑不足、潤滑油質量差、微波干燥機軸承太緊，組件。

4, microwave dryer bearing burning: microwave dryer Jiangsu SKF bearing bearing raceway, rolling body has tempering color. The causes of burns are usually lack of lubrication, poor quality of lubricating oil, too tight bearing of microwave dryer, and components.

5、微波干燥器江蘇SKF軸承座環裂紋：微波干燥器軸承座環的原因可能是由于微波干燥器江蘇SKF軸承的緊密匹配、微波干燥器軸承的外圈或內圈松動、夾雜物變形引起的。微波干燥器的江蘇SKF軸承的性能和微波干燥器的表面處理不良。

5, microwave dryer Jiangsu SKF bearing seat ring cracks: the reason for the microwave dryer bearing seat ring may be caused by the tight matching of the SKF bearing in the microwave dryer, the loose outer ring or inner ring of the microwave dryer bearing, and the deformation of the inclusions. The performance of Jiangsu SKF bearing and the surface treatment of microwave dryer are bad.

文章來自：江蘇SKF軸承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章來自：江蘇INA軸承 www.ina-china.cn

The article comes from: Jiangsu INA bearing www.ina-china.cn

文章來自：江蘇NSK軸承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com