TMS125 低煙無鹵阻燃聚烯烴熱收縮標識套管
應用
低煙無鹵阻燃聚烯烴熱收縮標識套管是專為電線電纜標識而設計，由輻照交聯低煙無鹵阻燃聚烯烴材質制成，具有優異的電氣性能、物理性能、化學性能和打印性能，可以方便地用標識打印直接打印，標識持久。不僅符合ROHS和REACH環保指令，而且符合IEC61249-2-21、歐盟2002/72/EC等環保標準的要求。
特性
v 收縮比：3:1，2:1
v 柔軟、低煙無鹵阻燃
v 可以方便打印
v 優異的打印性能，持久標識，符合SAE AS81531的打印標識要求
v 優異的電絕緣性能、物理性能和化學性能
v 符合ROHS、REACH環保規范
顏色
v 標準顏色：白色、黃色
v 其他顏色可定制
操作溫度范圍
v 連續使用溫度范圍：-55℃～125℃
v *起始收縮溫度：70℃
v *完全收縮溫度：110℃
符合標準
v SAE AS 81561,MIL-STD-202
v UL224 125℃600V
性能指標
性能 | 指標要求 | 測試方法 | 典型值 |
縱向收縮率 | ≤10％ | ASTM D 2671 | ≤5％ |
抗張強度 | 10.4MPa min | ASTM D 638 | ≥12MPa |
斷裂伸長率 | 200％ min | ASTM D 638 | ≥300％ |
老化后斷裂伸長率 (熱老化158℃,168小時) | 100％ min | ASTM D 638 | ≥200％ |
熱沖擊 | 無裂紋 | ASTM D 2671 | 無裂紋 |
低溫柔軟性 （-55℃，4小時） | 無裂紋 | ASTM D 2671 | 無裂紋 |
絕緣耐壓和擊穿 | 2500V,60sec,不擊穿 | ASTM D 2671 | 不擊穿 |
擊穿強度 | 19.7KV/mm min | ASTM D 2671 | ≥20KV/mm |
體積電阻率 | 1014??cm min | ASTM D 876 | ≥1014??cm |
腐蝕性 | 無腐蝕 | ASTM D 2671 | 無腐蝕 |
阻燃性 | 1分鐘內自熄 | ASTM D 2671 | 通過 |
打印性能 | 50次橡皮擦，可辨認 30次來回擦，可辨認 | SAE SA81531 MIL-STD-202 | 通過 |
抗液體 （23℃，24小時） | 打印吸識別 | SAE AS81531 | 通過 |
規格尺寸
規格 | 收縮前（mm） | 完全收縮后(mm) | 適用線纜范圍（mm） | |
英制 | 公制 | 內徑(min) | 內徑(max) | |
3:1 | ||||
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
1/8 | Ф3.2 | 3.2 | 1.1 | 1.1~2.7 |
3/16 | Ф4.8 | 4.8 | 1.6 | 1.8~4.1 |
1/4 | Ф6.4 | 6.4 | 2.1 | 2.3~8.1 |
3/8 | Ф9.5 | 9.5 | 3.2 | 3.5~8.1 |
1/2 | Ф12.7 | 12.7 | 4.2 | 4.6~10.8 |
3/4 | Ф19.1 | 19.1 | 6.3 | 7.0~16.3 |
1 | Ф25.4 | 25.4 | 8.5 | 9.3~21.6 |
2:1 | ||||
3/32 | Ф2.4 | 2.4 | 1.2 | 1.3~2.3 |
1/8 | Ф3.2 | 3.2 | 1.6 | 1.7~3.1 |
3/16 | Ф4.8 | 4.8 | 2.4 | 2.5~4.7 |
1/4 | Ф6.4 | 6.4 | 3.2 | 3.3~6.3 |
3/8 | Ф9.5 | 9.5 | 4.8 | 4.9~9.0 |
1/2 | Ф12.7 | 12.7 | 6.4 | 6.6~12.0 |
3/4 | Ф19.1 | 19.1 | 9.5 | 10.0~18.5 |
1 | Ф25.4 | 25.4 | 12.7 | 13.0~24.5 |
11/2 | Ф38.1 | 38.1 | 19.1 | 21.0~37.0 |
2 | Ф50.8 | 50.8 | 25.4 | 27.0~48.0 |
其他規格尺寸可定制
TMS125 Halogen Free Heat Shrinkable Polyolefin Identification Sleeve
Application
Special designed to meet the requiremwnts of identification of wire and cables. It is made of halogen-free flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. It can be printed by market printed with permanent identification. TMS125 meets the requirement of ROHS, REACH, IEC61249-2-21 and EU2002/72/EC standards.
Characteristics
v Shrink ratio: 3:1, 2:1
v Flexible, Halogen-free flame-retardant.
v Easy to be print.
v Excellent printing property, permanent identification, SAE AS81531 applicable.
v Excellent electrical, physical, chemical and printing properties.
v ROHS and REACH compliant.
Color
v Standard color: White, yellow
v Other colors are available upon request.
Operating Temperature Range
v Operating temperature: -55℃～125℃
v Minimum shrink temperature: 70℃
v Minimum fully recovery temperature: 110℃
Approvals
v SAE AS 81561,MIL-STD-202
v UL224 125℃600V
Property
Property | Requirement | Test method | Typical data |
Longitudinal shrinkage | ≤10％ | ASTM D 2671 | ≤5％ |
Tensile strength | 10.4MPa min | ASTM D 638 | ≥12MPa |
Elongation at break | 200％ min | ASTM D 638 | ≥300％ |
Elongation after aging （158℃,168hrs） | 100％ min | ASTM D 638 | ≥200％ |
Heat shock | No crack | ASTM D 2671 | No crack |
Low-temperature flexibility（-55℃,4hrs） | No crack | ASTM D 2671 | No crack |
Dielectric voltage withstand | 2500V,60sec,no breakdown | ASTM D 2671 | No breakdown |
Dielectric strength | 19.7KV/mm min | ASTM D 2671 | ≥20KV/mm |
Volume resistivity | 1014??cm min | ASTM D 876 | ≥1014??cm |
Corrosion | No corrosion | ASTM D 2671 | No corrosion |
Flammability | Self-extinguishing within one second | ASTM D 2671 | Pass |
Printing performance | 50rubs, legible 30strokes, legible | SAE SA81531 MIL-STD-202 | Pass |
Fluid resistance（23℃，24hrs） | Printing legible | SAE AS81531 | Pass |
Sizes
Size | Assupplied(mm) | After recovered(mm) | Recommended use range （mm） | |
inch | mm | Inside diameter(min) | Insidediameter (max) | |
3:1 | ||||
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
1/8 | Ф3.2 | 3.2 | 1.1 | 1.1~2.7 |
3/16 | Ф4.8 | 4.8 | 1.6 | 1.8~4.1 |
1/4 | Ф6.4 | 6.4 | 2.1 | 2.3~8.1 |
3/8 | Ф9.5 | 9.5 | 3.2 | 3.5~8.1 |
1/2 | Ф12.7 | 12.7 | 4.2 | 4.6~10.8 |
3/4 | Ф19.1 | 19.1 | 6.3 | 7.0~16.3 |
1 | Ф25.4 | 25.4 | 8.5 | 9.3~21.6 |
2:1 | ||||
3/32 | Ф2.4 | 2.4 | 1.2 | 1.3~2.3 |
1/8 | Ф3.2 | 3.2 | 1.6 | 1.7~3.1 |
3/16 | Ф4.8 | 4.8 | 2.4 | 2.5~4.7 |
1/4 | Ф6.4 | 6.4 | 3.2 | 3.3~6.3 |
3/8 | Ф9.5 | 9.5 | 4.8 | 4.9~9.0 |
1/2 | Ф12.7 | 12.7 | 6.4 | 6.6~12.0 |
3/4 | Ф19.1 | 19.1 | 9.5 | 10.0~18.5 |
1 | Ф25.4 | 25.4 | 12.7 | 13.0~24.5 |
11/2 | Ф38.1 | 38.1 | 19.1 | 21.0~37.0 |
2 | Ф50.8 | 50.8 | 25.4 | 27.0~48.0 |
Other sizes are available upon request.
