TMS135 軍標級標識套管專用保護套管
應用
是專為高性能電線電纜標識而設計，由輻照交聯優質耐溫135℃柔軟高阻燃聚烯烴材質制成，具有優異的電氣性能、物理性能、化學性能和打印性能，方便提供給標識打印機直接打印，標識持久，適用于線束、線纜的高性能持久標識。
特性
v 收縮比：3:1, 2:1
v 軍標級
v 優異的打印性能，持久標識。
v 優異的電絕緣性能、物理性能和化學性能
v 柔軟、高阻燃
v 符合ROHS、REACH環保規范
顏色
v 標準顏色：白色、黃色
v 其他顏色可定制
操作溫度范圍
v 連續使用溫度范圍：-55℃～135℃
v *起始收縮溫度：70℃
v *完全收縮溫度：110℃
符合標準
v SAE AMS-DTL-23053/5
v UL224 125℃600V VW-1
v SAE AS 81531,MIL-STD-202
性能指標
性能 | 指標要求 | 測試方法 | 典型值 |
縱向收縮率 | ≤10％ | ASTM D 2671 | ≤5％ |
抗張強度 | 10.4MPa min | ASTM D 638 | ≥12MPa |
斷裂伸長率 | 200％ min | ASTM D 638 | ≥400％ |
老化后斷裂伸長率 (熱老化175℃,168小時) | 100％ min | ASTM D 638 | ≥400％ |
熱沖擊 | 無裂紋 | ASTM D 2671 | 無裂紋 |
低溫柔軟性 （-55℃，4小時） | 無裂紋 | ASTM D 2671 | 無裂紋 |
絕緣耐壓和擊穿 | 2500V,60sec,不擊穿 | ASTM D 2671 | 不擊穿 |
擊穿強度 | 19.7 KV/mm min | ASTM D 2671 | ≥25KV/mm |
體積電阻率 | 1014??cm min | ASTM D 876 | ≥1014??cm |
腐蝕性 | 無腐蝕 | ASTM D 2671 | 無腐蝕 |
阻燃性 | 1分鐘內自熄 | ASM-DTL-23053 | 通過 |
打印性能 | 50次橡皮擦，可辨認 30次來回擦，可辨認 | SAE SA81531 MIL-STD-202 | 通過 |
抗液體 （23℃，24小時） | 打印吸識別 | SAE AS81531 | 通過 |
規格尺寸
規格 | 收縮前（mm） | 完全收縮后(mm) | 適用線纜范圍（mm） | |
英制 | 公制 | 內徑(min) | 內徑(max) | |
3:1 | ||||
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
1/8 | Ф3.2 | 3.2 | 1.1 | 1.1~2.7 |
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
3/16 | Ф4.8 | 4.8 | 1.6 | 1.8~4.1 |
1/4 | Ф6.4 | 6.4 | 2.1 | 2.3~5.5 |
3/8 | Ф9.5 | 9.5 | 3.2 | 3.5~8.1 |
1/2 | Ф12.7 | 12.7 | 4.2 | 4.6~10.8 |
3/4 | Ф19.1 | 19.1 | 6.3 | 7.0~16.3 |
1 | Ф25.4 | 25.4 | 8.5 | 9.3~21.6 |
11/2 | Ф38.1 | 38.1 | 13.5 | 15.0~33.0 |
2 | Ф50.8 | 50.8 | 17.5 | 19.0~48.0 |
2:1 | ||||
3/32 | Ф2.4 | 2.4 | 1.2 | 1.3~2.3 |
1/8 | Ф3.2 | 3.2 | 1.6 | 1.7~3.1 |
3/16 | Ф4.8 | 4.8 | 2.4 | 2.5~4.7 |
1/4 | Ф6.4 | 6.4 | 3.2 | 3.3~6.3 |
3/8 | Ф9.5 | 9.5 | 4.8 | 4.9~9.0 |
1/2 | Ф12.7 | 12.7 | 6.4 | 6.6~12.0 |
3/4 | Ф19.1 | 19.1 | 9.5 | 10.0~18.5 |
1 | Ф25.4 | 25.4 | 12.7 | 13.0~24.5 |
11/2 | Ф38.1 | 38.1 | 19.1 | 21.0~37.0 |
2 | Ф50.8 | 50.8 | 25.4 | 27.0~48.0 |
其他規格尺寸可定制
TMS135 Military Grade Heat Shrinkable UVProtection Sleeve for Markers
Application
Special designed to meet the requirement of high performance identification of wire and cable. It is made of superior flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. Permanent printing property can be widely used for high-performance identification of wire and cables in industrial, military, areospace, etc.
Characteristics
v Shrink ratio: 3:1, 2:1
v Military grade
v Excellent printing property, permanent identification
v Excellent electrical, physical, chemical and printing properties.
v Flexible, highly flame-retardant.
v ROHS and REACH compliant
Color
v Standard color: White, yellow
v Other colors are available upon request.
Operating Temperature Range
v Operating temperature: -55℃～135℃
v Minimum shrink temperature: 70℃
v Minimum fully recovery temperature: 110℃
Approvals
v SAE AMS-DTL-23053/5
v UL224 125℃600V VW-1
v SAE AS 81531,MIL-STD-202
Property
Property | Requirement | Test method | Typical data |
Longitudinal shrinkage | ≤10％ | ASTM D 2671 | ≤5％ |
Tensile strength | 10.4MPa min | ASTM D 638 | ≥12MPa |
Elongation at break | 200％ min | ASTM D 638 | ≥400％ |
Elongation after aging （175℃,168hrs） | 100％ min | ASTM D 638 | ≥400％ |
Heat shock | No crack | ASTM D 2671 | No crack |
Low-temperature flexibility（-55℃,4hrs） | No crack | ASTM D 2671 | No crack |
Dielectric voltage withstand | 2500V,60sec,no breakdown | ASTM D 2671 | No breakdown |
Dielectric strength | 19.7 KV/mm min | ASTM D 2671 | ≥25KV/mm |
Volume resistivity | 1014??cm min | ASTM D 876 | ≥1014??cm |
Copper corrosion | No corrosion | ASTM D 2671 | No corrosion |
Flammability | Self-extinguishing within one second | ASM-DTL-23053 | Pass |
Printing performance | 50rubs, legible 30strokes, legible | SAE SA81531 MIL-STD-202 | Pass |
Fluid resistance（23℃，24hrs） | Printing legible | SAE AS81531 | Pass |
Sizes
Size | Assupplied(mm) | After recovered(mm) | Recommended use range （mm） | |
inch | mm | Inside diameter(min) | Insidediameter (max) | |
3:1 | ||||
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
1/8 | Ф3.2 | 3.2 | 1.1 | 1.1~2.7 |
3/32 | Ф2.4 | 2.4 | 0.8 | 0.9~2.0 |
3/16 | Ф4.8 | 4.8 | 1.6 | 1.8~4.1 |
1/4 | Ф6.4 | 6.4 | 2.1 | 2.3~5.5 |
3/8 | Ф9.5 | 9.5 | 3.2 | 3.5~8.1 |
1/2 | Ф12.7 | 12.7 | 4.2 | 4.6~10.8 |
3/4 | Ф19.1 | 19.1 | 6.3 | 7.0~16.3 |
1 | Ф25.4 | 25.4 | 8.5 | 9.3~21.6 |
11/2 | Ф38.1 | 38.1 | 13.5 | 15.0~33.0 |
2 | Ф50.8 | 50.8 | 17.5 | 19.0~48.0 |
2:1 | ||||
3/32 | Ф2.4 | 2.4 | 1.2 | 1.3~2.3 |
1/8 | Ф3.2 | 3.2 | 1.6 | 1.7~3.1 |
3/16 | Ф4.8 | 4.8 | 2.4 | 2.5~4.7 |
1/4 | Ф6.4 | 6.4 | 3.2 | 3.3~6.3 |
3/8 | Ф9.5 | 9.5 | 4.8 | 4.9~9.0 |
1/2 | Ф12.7 | 12.7 | 6.4 | 6.6~12.0 |
3/4 | Ф19.1 | 19.1 | 9.5 | 10.0~18.5 |
1 | Ф25.4 | 25.4 | 12.7 | 13.0~24.5 |
11/2 | Ф38.1 | 38.1 | 19.1 | 21.0~37.0 |
2 | Ф50.8 | 50.8 | 25.4 | 27.0~48.0 |
Other sizes are available upon request.
