LDT0壓電薄膜傳感器

產品來源：傳感器供應商——北京賽斯維測控技術公司產品說明：LDT0壓電薄膜傳感器:The ‘L’ in LDT Series stands for ‘laminated’ sensor. Typically, a 0.005” (125μm) polyester layer is laminated to a 28 μm or 52μm piezo film element. When used in a ‘bending’ mode, laminated film elements develop much higher voltage output when flexed than a non-laminated DT elements series. The neutral axis is in the laminate instead of in the film so the film is strained more when flexed. The capacitance is proportional to the area and inversely proportional to the thickness of the element. Piezo film sensors LDT elements are available in a variety of lead attachment options. For significantly increased sensitivity, the LDTM-028K (M-Mass) combines an LDT0-028K form factor with the addition of a 0.72 gram round mass. The LDT1, 2 and 4 have 12” of 26 gauge twisted pair wire. The LDT0-028K and LDTM-028K with solder tabs can be soldered directly to a PCB with areasonable level of care. Piezo film cannot withstand high temperatures (>80°C),andthereforesoldering of the pins to a PCB must be done quickly. A heatsink clamped to the interface area between the film and the crimps will take the heat away from the film. Pre-tin thePCBandthenquickly solder the sensor to the board. Do not allow the soldering iron to touch the film, and do not use a dwell time of over 5 seconds on the pins. Low temperature solders can also be used. For tightly tolerance sensitivity requirements, please consult MeasurementSpecialties for techniques used to control variations of boundary conditions in production.
所屬品牌：MEAS
輸出： 高電壓輸出
量程： -
封裝：薄膜元件
工作溫度范圍： 0～70℃
精度：1.4V/g~16V/g
供電電源：無源
特點：寬頻（0.001Hz～1000MHz），高靈敏度，高介電強度，低聲阻抗，高穩定性
類型：壓電薄膜懸臂梁質量塊
電氣連接： PC板安裝
典型應用： 汽車防盜報警器,臥式滾筒洗衣機振動，電子靶，計數器觸發器 ，生命特征的監護

如有疑問或需要了解產品更多詳情，您可以直接撥打 13811767686  010-84775646、84775648，電話咨詢我們的工程師