廣州SGS提供建筑材料阻燃防火等級可燃性測試
關鍵字:阻燃，防火等級，可燃性，易燃性，不燃測試，氧指數，煙密度，EN13501，NFP92，GB8624，DIN4102，E84，AS1530，E648，E136，E162，E662

材料防火性能的檢測室各國政府都要求強制執行的。目前世界上有建筑防火的標準體系分三大類：歐洲體系，美洲體系和澳洲體系。
SGS能為您的產品提供世界上大多數國家的防火測試，為您的產品在打入當?shù)厥袌?chǎng)的過程中節省時間和費用

防火測試項目：
防火評級，可燃性，難燃性，不燃性，燃燒釋放熱量，著火性，氧指數，毒性指數，產煙量，燃燒滴落物，煙密度...

測試標準有：
EN 13501-1 歐標建材防火測試
Fire classification of construction products and building elements. Classification using test data from reaction to fire
NF P 92-507 法標建材防火測試
Fire safety-building-Interior fitting materials-classification according to their reaction to fire
GB 8624 建材防火等級
Classification for burning behavior of building materials and products
BS 476 英標建材防火測試
Fire tests on building materials and structures.
DIN 4102 德標建材防火測試
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame
ASTM E 84 建材表面燃燒
Standard Test Method for Surface Burning Characteristics of Building Materials
GB/T 2408 塑料燃燒性能
Plastics-Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
ISO 5658-2 火焰蔓延
Reaction to fire tests —Spread of flame —Part 2: Lateral spread on building andtransport products in vertical configuration
NFPA 259 建材潛熱測試
Standard Test Method for Potential Heat of Building Materials
ISO 9705 全尺寸房間火試驗
Fire testing – full Scale Room test for surface produts
ASTM E162 火焰蔓延
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
NES 711 燃燒煙指數
Determination of the smoke index of the products of combustion from small specimens of materials
AS/NZS 3837 燃燒熱值和產煙測試
Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter
AS/NZS 1530 澳標建材防火要求
Methods for fire tests on building materials components and structures
ISO 5659-2 燃燒煙密度
Plastics- Smoke generation Part 2: Determination of optical density by a single-chamber test
ASTM D3675 泡沫材料表面燃燒
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 648 鋪地材料－輻射熱源法
Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ISO 5660-1 熱釋放速率
Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
ASTM E136 不燃性測定
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C