阻燃防火魔術貼搭扣 防火粘扣帶 阻燃魔術貼 燃燒不著火

Flame-retardant Velcro strap Flame-retardantVelcro strap does not burn

阻燃防火織帶 防火織帶 阻燃織帶 燃燒不著火

Flame-retardant webbing flame-retardant webbingdoes not burn

防火阻燃魔術貼應用場景

阻燃魔術貼又名防火魔術貼，通常也叫阻燃防火魔術貼，是尼龍織物材料做成制品，尼龍織物阻燃的特點是：

1，如果把阻燃劑和尼龍一起紡成絲，再做成阻燃尼龍織物魔術貼，那么這個絲的物理性能很差，抗沖強度和耐撕裂強度都不夠，因此只能做成涂層型阻燃；

2，尼龍織物本身就很容易融滴，阻燃效果比較差；

3，尼龍的附著力比較差，涂層容易脫落。

每阻燃劑的小女孩和客戶一起探討尼龍織物阻燃劑

賣阻燃劑的小女孩經過超萬次的試驗和現場使用，徹底解決了這幾個問題。是怎么解決的呢？是通過三大革命性技術支持：

*，TOP-modify材料改性技術開創尼龍織物阻燃劑的新時代；

第二，seal-sealAI智能互聯技術開創尼龍織物和阻燃劑相容的新時代；

Composite 500 吸附技術尼龍織物和阻燃劑強附著力的新時代。

使用準確尼龍織物阻燃劑的魔術貼效果好

正常情況下賣阻燃劑的小女孩，阻燃尼龍魔術貼用的阻燃工藝是涂層工藝，阻燃劑和油性聚氨酯復配均勻，再把混合物均勻涂覆到魔術貼上，厚度一般為80--120克/平方米，然后在烘箱中120--150度進行烘烤即可。

很多不負責任的廠商生產的阻燃魔術貼，沒有清洗的時候，阻燃效果很好，但是只要洗過一次，阻燃效果就幾乎沒有了。為什么會產生這種現象呢？原來這種阻燃產品是水溶性產品，一旦遇到水，就會很快失去阻燃性能。

檢測的方法也很簡單，把阻燃尼龍魔術貼放到常規洗衣機中，加入40℃的溫水，攪拌45分鐘，經過25次洗禮以后，仍然能夠達到UV94-V0標準，ISO-EN11612標準，那么這種阻燃劑就是優質的阻燃劑。

賣阻燃劑的小女孩給阻燃魔術貼做阻燃測試

用打火機燒防火尼龍魔術貼，持續12秒，沒有滴落，沒有陰燃和續燃，這種阻燃劑就是好的阻燃劑。

好的尼龍魔術貼阻燃劑用量為80--100%，由于用量大，所以很容易造成物理性能下降，比如附著力下降，解決的方法一般是增加附著力增強劑，也叫牢度增強劑。選擇優質的尼龍織物阻燃劑，這種阻燃劑本身就有附著力增強功能，省心.

防火阻燃尼龍魔術貼用在消防服上，一般不細心的人不注意，選擇留心觀察一下，用途真不少。防火阻燃魔術貼都用在消防服的什么地方呢？防火阻燃魔術貼在消防服上用途可真不少。

尼龍織物阻燃劑橫空出世，解決了阻燃防火魔術貼的阻燃功效，為消防員贏得一次戰勝火魔的機會。

阻燃魔術貼是特殊設計的魔術貼，具有阻燃特性。其耐高溫、阻燃功能強，提高安全性，適用于防火防爆場合，如航空航天、軍工等領域。部分產品還具有環保特性，符合環保標準。

Fireproof and flame retardant Velcroapplication scenarios

Flame retardant Velcro, also known as fireretardant Velcro, usually called fire retardant Velcro, is made of nylon fabricmaterials, nylon fabric flame retardant characteristics are:

1, if the flame retardant and nylon arespun into silk, and then made into flame retardant nylon fabric Velcro, thenthe physical properties of the silk are very poor, impact strength and tearstrength are not enough, so it can only be made into coating flame retardant;

2, nylon fabric itself is easy to meltdrops, flame retardant effect is relatively poor;

3, the adhesion of nylon is relativelypoor, the coating is easy to fall off.

Each little flame retardant girl andcustomer explores nylon fabric flame retardants together

The little girl who sells flame retardantshas thoroughly solved these problems after more than 10,000 tests and fielduse. How was it solved? Supported by three revolutionary technologies:

First, TOP-modify material modificationtechnology creates a new era of nylon fabric flame retardant;

Second, seal-seal AI intelligent interconnectiontechnology opens a new era of compatibility between nylon fabrics and flameretardants;

Composite 500 adsorption technology A newera of strong adhesion to nylon fabrics and flame retardants.

Velcro using accurate nylon fabric flameretardants works well

Under normal circumstances, the flameretardant process for flame-retardant nylon Velcro is the coating process, theflame retardant and oily polyurethane are evenly mixed, and then the mixture isevenly coated to the Velcro, the thickness is generally 80--120 grams/squaremeter, and then baked in the oven at 120--150 degrees.

Many irresponsible manufacturers of flameretardant Velcro, no cleaning, the flame retardant effect is very good, but aslong as washed once, the flame retardant effect is almost no. Why does thishappen? The original flame retardant product is water-soluble products, onceencountered water, will quickly lose flame retardant properties.

The detection method is also very simple,put the flame-retardant nylon Velcro into the conventional washing machine, add40℃ warmwater, stir for 45 minutes, after 25 baptism, can still reach the UV94-V0standard, ISO-EN11612 standard, then this flame retardant is a high-qualityflame retardant.