polyvinylidence fluoride tubing. C-Kynar is excellent recovered, the tubing will shrink to 50% of its original
flame retardant and high temperature resistance. diameter. The recovered wall thickness of the tubing is
C-Kynar is rated for operation at -55oC to 150oC. proportional to the degree of recovery.
Typical Applications Standard Colors
C-Kynar can offer superb abrasion and cut-through Standard color: Clear, Black.
resistance, chemical and solvent resistant properties.
It can reliably protect solder joints, terminals and wire Standard Packaging
splices. The clear appearance makes it easily to inspect Large spools.
the mark on protected harness Cut piece is available base on special request.
Typical Properties
PPr rre eel lli iimmi iinnnaaarrryyy Daaatttaaassshhheeeeeettt
Physical Chemical
Operation Temperature -55oC to +150oC Copper Corrosion No corrosion
Fully Recovery Shrink Temperature 135oC Minimum Water Absorption 0.2%
Tensile Strength 30 Mpa Electrical
Ultimate Elongation 200% Volume Resistance > 1013 ohm-cm
Heat Shock (250°C, 4 hrs) No cracking, no dropping Dielectric Strength 2.5kV/1minutes
Low Temperature Flexibility No cracking
(4 hr. @-55oC)
Flammability Meet VW-1
Note: technical information provided consists of typical product data
and should not be used for specification purposes.
Ordering Information
Order C-Kynar tubing by product name, size equivalent to the expanded inside diameter, package type and color.
Other sizes are available subject to factory quotation. Always order the largest size that will shrink snugly over the
item to be covered.
Example: C-Kynar Black, 1.2/0.6mm.
C-Kynar Size and Dimensions
|
Ordering Size |
Expanded I.D. (Minimum) mm |
Recovered I.D. (Maximum) mm |
Total recovered wall thickness (Nominal) mm |
Standard length m/spool |
Standard |
color |
|
|
mm |
inch size For reference |
||||||
|
1.2 |
3/64 |
1.2 |
0.6 |
0.25 |
200 |
Clear, Black |
|
|
1.6 |
1/16 |
1.6 |
1.6 |
0.25 |
200 |
||
|
2.4 |
3/32 |
2.4 |
1.2 |
0.25 |
200 |
||
|
3.2 |
1/8 |
3.2 |
1.6 |
0.25 |
100 |
||
|
4.8 |
3/16 |
4.8 |
2.4 |
0.25 |
100 |
||
|
6.4 |
1/4 |
6.4 |
3.2 |
0.30 |
100 |
||
|
9.5 |
3/8 |
9.5 |
4.8 |
0.30 |
50 |
||
|
12.7 |
1/2 |
12.7 |
6.4 |
0.30 |
50 |
||
|
19.1 |
3/4 |
19.1 |
9.5 |
0.43 |
50 |
||
|
25.4 |
1 |
25.4 |
12.7 |
0.48 |
50 |
||
|
38.1 |
11/2 |
38.1 |
19 |
0.51 |
50 |
||
3M is a trademark of 3M
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and
liability associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated
above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether
direct, indirect, special, incidental or consequential regardless of the legal theory asserted.
3M is a trademark of 3M
